Rebuilt 1966 401 Engine: · Custom AutoTec forged pistons built to spec for this engine · Rollmaster Double Roller Timing Chain Set · TA Performance TA25 cam shaft · NOS steel shim head gaskets · Romac balancer · Telesco rebuilt distributor with Lectric Limited conversion · Telesco rebuilt 3921S carburetor Rebuilt 1966 ST300 Transmission: · Alto red clutches · Kolene Steels · Stock switch pitch converter The engine was rebuilt in September of 2015 by a known Buick engine builder in Connecticut and has been in dry storage since. The shrink wrap was removed for the photos in April of this year. The engine was measured and machined first. The pistons were made in the initial run of forged pistons Tom T. had AutoTec build back in 2014-2015. The compression ratio came in at 10:1. The transmission was rebuilt in December of 2015 and has been in dry storage since. Everything you see is included including all brackets, motor plates, re-vulcanized motor mounts, air cleaner, power steering pump and bracket, oil pan fuel line holders, restored GS manifolds, switch pitch actuator and wiring harness. If the engine and transmission cannot be picked up locally, I have a commercial loading dock at my office, and can build a crate/pallet to ship anywhere. Shipping is not included in the price. Parts are located in Franklin Mass. Parts are cross posted. The price for everything above and in the photos is $ 6,000 or best offer.
