I have a 1969 Skylark custom, which I would like to install a Talley steering wheel. Do anyone have a write up with pic of this or similar conversion. Thanks Jaye
You will need a steering wheel pully from a local auto parts store. once you get the center of your steering wheel taken off you will see one big bolt. Take it off then use the steering wheel pull system to get the wheel off then put the new hub and rally steering wheel back on. Its not hard just take your time and the right tools to take it off.
I'm good on all that you mentioned however, when I pull the steering wheel off; I can just put the hub on without replacing or doing anything to the cam or horn plunger. Also there is a tab on the underside of the horn ring that goes on top of the steering wheel, what position will this tab need to be. Thanks for the reply Rayan Jaye