Looking for Power Steering brackets for a 69-70 Buick 350. The one with the Aluminum plate that bolts to the head. High mount. I have a aluminum plate, see picture, need the 2 stamped plates. Would also like one complete set of brackets .
That looks like what I need. I am doing a power steering, Saginaw conversion on 69-70 CJ5 Jeep with a Buick V6, 225 oddfire. Was told to get a "high mount" PS bracket off of a 70's Buick 350. It bolts right up and pulleys are aligned right. The Jeep has a front dump exhaust manifold on drivers side. With the PS pump mounted high, the exhaust system does not have to be changed. When the steering shafts are run, the exhaust might be in the way. If it is, then you need a drivers side exhaust manifold off a Buick 231 oddfire, which is rear dump. I was told that the aluminum bracket I posted the picture of, is part of the mount and that piece is correct.