Power steering relocation help!!

Discussion in 'Small Block Tech' started by Sebambam, Aug 14, 2017.

  1. Jim Blackwood

    Jim Blackwood Well-Known Member

    Well, I'm not so sure. Seems to me you should be able to pick up an EPS column at the pick-n-pull for around a C note and rumor has it you don't even need the Bruno box if you are happy with midrange torque. Doesn't get much cheaper than that. I can buy a complete modified column ready to bolt in my MGB for $800, including the Bruno.
     
  2. Sebambam

    Sebambam Well-Known Member

    Thanks jim. I try out the 71+ braclets 1st then if it dont work im looking for other solutions
    The manifolds where designed for PS but obviously not for 68,69 model PS
     
  3. hugger

    hugger Well-Known Member

    I've got a Serpentine setup off a V6 I was building, the pics may still be here. But it's a modified GN setup that put the alternator in front of the valvecover and runs the GN PS pump. Really neat and tight to the engine, alternator is a late model Toyota 140amp mini style one wire
     
  4. Sebambam

    Sebambam Well-Known Member

    I got a custom bracket mini. Alt as well.. I will try out the 71+ brackets for the PS 1st.
    Got to find a set.. If anybody has it, let me know ;)
     

Share This Page