Parts question

First I have several sets of radiator cross support bars. Some are longer than the others can someone tell me what they fit?

Second I have several oil pans, two different styles can someone tell me what they fit/

Thanks for any help
Nelson



.

 

I have a 70 rod here I will measure it in the morning if that would help

 

Top oil pan is from a 1967 GS400. Bottom pan is the later style

 

Sounds good.

Thanks for the info on the pan

 

The ones for my 72 are 39 3/4 long.
I will measure the others and post later.

 

Long ones have to be big car Nelson

 

Thanks Dave...

 

Nelson . The one I have is 39 and 3/4 inches long . Threaded on one end and slotted hole on other end. from a 70 GS but 70-72 are the same except some are straight and some have a hump in them supposedly for the AC Dryer .

If your going to sell any I would be interested in a straight one 39 and 3/4 inches long to make a set for me as I only have 1 now . Thanks.

 

I'd also be interested if you have a set that will fit a '72 with A/C.

Kyle

 

Ok, The long ones are 39 3/4 long. I know for sure that this length is correct for 1972 GS as I measured the ones from my 72 GS convertible. The short ones are 36 3/4 long....
Could these be for 68-69????

I thought all 70 had straight ones, even with AC. I thought the hump started in 72 supposedly for the AC Dryer . ?????



.

 

The bent ones started in 72. 70-71 were the same straight ones.

 

Any ideas on the short ones????

Thanks

 

I would be interested in a long set if you are selling - prefer 72 AC style but will take whatever I can get...

 

the 400 pan wont clear the front main caps on a 455,400 and 430s had smaller caps

 

Thank you. I will note that when I list it.