Parts needed for a new build.

Discussion in 'Parts wanted' started by yachtsmanbill, Dec 29, 2018.

  1. yachtsmanbill

    yachtsmanbill Well-Known Member

    Just picked up a 1964 Special DeLuxe and a 455 and need some pieces for it. The 455 is a '75 and really tired. I need some PRE-EGR intake stuff as in heads and intake manifold, possibly an upgrade cam(of course!) with lifters, nothing too radical (maybe stage I-ish?) and a used 455 manual Flywheel to get balanced with the crank job next week. I am on a budget. primarily interested in good used Detroit iron taking up shelf space. Thanks guys...
    Bill in Two Rivers, Wi. 630 388 8882 no texting please...
    Last edited: Dec 29, 2018
  2. flynbuick

    flynbuick Super Moderator Staff Member

    I have a couple of 70 cast iron intakes. Shipping from NC will not be cheap. If you do not find one closer let me know.
  3. yachtsmanbill

    yachtsmanbill Well-Known Member

    Thanks Jim... 65 lbs is a killer. I think I found one "kinda" local. Close enough to drive to, I HOPE!

    Any calls, I am old school and dont text ... what the..????? I like human interaction. Thanks, Bill
  4. newmexguy

    newmexguy Well-Known Member

    Late '69 coded engine. From a BCE body. Not heavily scaled / corroded. Been drained and upright for a long time. Willing to pull off heads and intake and have checked. Original hardware would be included - intake and heads. Greyhound Bus should handle - intake in one crate, heads in a second.

    Attached Files:

    Last edited: Jan 3, 2019
  5. yachtsmanbill

    yachtsmanbill Well-Known Member

    Hey NMG... Thanks for the look! I think for now I have a local guy that has a barn full of 430 and 455 long blocks, but I may be interested in that PS bracket; do you have the other 1/2? ws
  6. ToddsGS

    ToddsGS Founders Club Member

    I have a 71 Intake (CLEAN) and am located in Wisc. I have other engine stuff also. 2 Sets of 72/73 Heads. Brackets, Distributors, Hardware, Plug Wires and other Misc Brackets etc.. . . .

    Attached Files:

  7. yachtsmanbill

    yachtsmanbill Well-Known Member

    Thanks Todd! Sorry Im behind here. Been pretty busy. I have a local source for the big heavy stuff but will keep you in mind for brackets and fasteners for sure! Bill in TR
  8. johnriv67

    johnriv67 Well-Known Member

    Got a fine 68 430 intake manifold that came on an engine with the big port heads. Its a long ways with shipping, but if you want it, throw $10 on whatever the shipping cost is.

Share This Page