parts for sale

Discussion in 'Parts for sale' started by Michael Evans, Jul 12, 2009.

  1. Michael Evans

    Michael Evans a new project

    Have a few things I can carry to The BPG meet or can mail.

    I will be there all day Saturday for sure, but may be there longer.

    First cosiderations will be for hand delivery will mail afterward.

    1.

    2. Used ARP bolts for 455 Buick (four a little rounded) $35.00

    3. Two 3 inch muffler clamps $5.00

    4. One 14 X 6 bare rally wheel. $25.00

    5. Buick 455 to 440 Mopar intake adaper plate kit $250.00

    6. 455 Roller cam and roller lifters $600.00

    7.

    8. Used SFI 455 external balanced flex plate $65.00

    9. New/Used 250 Mallory electric fuel pump $180.00

    Can e-mail pitures just send me address just can't post them right now.
     
    Last edited: Aug 12, 2009
  2. bignastyGS

    bignastyGS Maggot pilot

    What application are the ARP bolts for?? 350? 455?? interested..
     
  3. NJBuickRacer

    NJBuickRacer I'd rather be racing...

    Roller cam specs? May be interested in lifter girdle also depending on cam specs.
     
  4. Michael Evans

    Michael Evans a new project

    The head bolts came off my 455.
     
  5. bignastyGS

    bignastyGS Maggot pilot

    Ok, I am looking for head studs...Sorry....
     
  6. Michael Evans

    Michael Evans a new project


    It is a TA 306R.

    I bought it big with the hopes of having it reground (about $155.00 from TA)to my specs.
     
  7. NJBuickRacer

    NJBuickRacer I'd rather be racing...

    A little too wild for my plans, I will pass on all.
     
  8. bostongsx

    bostongsx Platinum Level Contributor

    Is the cam set up new?
     
  9. 69GS400s

    69GS400s ...my own amusement ride!

    do you know the manufacturer of these ? Im interested....
     
  10. d7cook

    d7cook Guest

    5. Buick 455 to 440 Mopar intake adaper plate kit $250.00

    Which one is it?

    #1 If you are using standard cast iron Buick 400/430/455 heads, or any of the TA "low port" alum. heads such as the Street Eliminator series, then I have a specific set of billet alum. adaptors to let you use any Mopar intake from the "B" engine series meaning 361, 383, & 400 CID. These are considered "low deck" blocks by the Mopar engine builders. The cost is $xxx plus shipping for my adaptors, and that includes the valley plate and specific bolts which are countersunk.

    #2 If you are using any of the TA "high port" heads such as the Stg 3 or Track Eliminator heads, then I have a DIFFERENT set of adaptors that allow you to use any Mopar intake from the "RB" engine series, meaning 413, 426 Wedge, & 440 CID. These are considered "high deck" blocks by the Mopar engine builders. Again the cost is $xxx plus shipping for my adaptors and the kit includes the valley plate and specific bolts which are countersunk.
     
  11. Michael Evans

    Michael Evans a new project

    The cam and lifters were used on the dyno, I was told. After looking them over, I agree. They both look like new.
     
  12. Michael Evans

    Michael Evans a new project

    They are set #2.
     
  13. Michael Evans

    Michael Evans a new project

    They came with the new rear end yoke I bought from Denny's Drive Shift Service.
     
  14. 69GS400s

    69GS400s ...my own amusement ride!

    I'll take them ...
     
  15. Michael Evans

    Michael Evans a new project

    I will bring them Allen.



    I was up in the attic and found something else.

    8. Used SFI ,TA external balanced 455 automatic flex plate with bolts $65.00
     
  16. Michael Evans

    Michael Evans a new project

    Have the truck all packed up with only the parts asked for.

    Any one want me to bring anything on the list?
     
  17. Tuna

    Tuna Platinum Level Contributor

    P.M. sent
     
  18. 69GS400s

    69GS400s ...my own amusement ride!

    Mike - we never got a chance to hook up and do business at the Nats
     
  19. Rob Ross

    Rob Ross Well-Known Member

    Is the lifter girdle still available? What is left for sale?
     
  20. Michael Evans

    Michael Evans a new project

    I have up dated the list. Everything on the list is avaliable
     

Share This Page