Parting out 69 Skylark 2 door

Discussion in 'Car Part-Outs' started by carmantx, Dec 27, 2011.

  1. carmantx

    carmantx Never Surrender

    A new car part out section. So here it goes. Please follow the rules of the section and respond in this thread for what you are interested in.

    This is a 69 Skylark Custom 2 door. Was a small block car, and somebody stuck a chevy in it. Core support is straight and good on driver side, mild rust under battery. Driver side inner is very nice, as is the door and front fender. They have been replaced at some time. Passenger side fender and door show some rust. I have a nice trunk lid. Frame is in nice shape.
    This car has:
    Power Steering
    Power Drum Brakes
    A/C
    Black interior
    Split bench front seat
    Black seat belts
    14" ralley wheels

    I also have many other skylarks from 68 to 72. Let me know if you need anything.

    Cars are located in Ropesville, TX
    I take paypal, check, MO, trades, and even give some stuff away to those in need. I'll cut a break for active Military as my way of thanking for your service. Parts are used, and old, and will be described accurately. I can ship by UPS, USPS, FedEx, and greyhound. Please be patient and give me a little time. This is a hobby, and I am slow going.
     

    Attached Files:

  2. jman21

    jman21 Well-Known Member

    Hi, do you have power windows for a 1969 skylark covert front & rear... I currently have manual windows and would like to switch over to pwer.. thanks j.
     
  3. carmantx

    carmantx Never Surrender

    j, I don't have any power window on any of my cars. Thanks for checking with me.
     
  4. ddhathaway

    ddhathaway Platinum Level Contributor

    Am looking for a driver quality front bumper for 72 skylark, if you happen to have one. I have new rubber trim so that's not important.
     
  5. George D.

    George D. Platinum Level Contributor

    Mark,

    Price on the AC lines, the dryer- which sits on the inner fender with foam wrap and the condensor on the front of the core support please :)
     
  6. cobravii

    cobravii Well-Known Member

    That car is to nice to trash! good thing it's not a GS though.

    we would kill to have rust free cars like that up here.
     
  7. gszinny

    gszinny Platinum Level Contributor

    I'm looking for some good metal at the base of the windshield on 1970 Buick GS. Under the lower edge of windshield, from left to right, pillar to pillar, up into the speaker area.
     
  8. carmantx

    carmantx Never Surrender

    Dennis, I may have a driver quality front 72 bumper. Not rusted. I have several sitting around, I will get you some pictures to see if one might work for you.

    George, what would be a fair price for the A/C lines and stuff you need? $60 plus shipping?

    Larry, this car was saved from the crusher for scrap metal, which is why I have most of my cars. I can't build them all, so I build what I can, sell parts from the rest. And getting slower at both.

    Dan, I don't have a 70 specific that I can cut, but I do have several 72's with nice base that would work well for you. I don't mind cutting. Will a 72 work for you?
     
  9. gszinny

    gszinny Platinum Level Contributor

    Not sure if 1972 w/s lower metal base is the same as 1970, let me look into this and get back to you...Dan
     
  10. George D.

    George D. Platinum Level Contributor

    Mark- PM your way.. :)
     
  11. NASTYBUICKGSX

    NASTYBUICKGSX Active Member

    How much for seat belts, need a set for 69 f85? Are they decent?
     
  12. Thomaswarlord

    Thomaswarlord Well-Known Member

    Hi, Im wondering about the fender "gills" Are they in good shape, hard to tell from the pics. And how much for them please? Thanks.
     
  13. carmantx

    carmantx Never Surrender

    Nastybuickgsx. The belts looked good, with no frays. $100 for the complete set front and rear, plus $10 for shipping in US. If you are interested, I'll pull them to verify the condition.

    Thomaswarlord, I'll get some closer pictures of the gills for you. I have a couple sets of them in driver quality condition.
     
  14. dallas

    dallas Well-Known Member

    Interested in 69 custom parts-. good horns, rally wheels and very good 2bbl air cleaner.
    PM sent.
     
  15. my69buford

    my69buford Silver Level contributor

    Hi Mark,

    Interested in a 69 AM radio. It doesn't have to work, just have a good front with knobs. Let me know.
     
  16. carmantx

    carmantx Never Surrender

    Dallas, I have good ralley wheels, horns and air cleaners that would work for you.

    Dave, I don't have any AM radios.
     
  17. 67 Post GS

    67 Post GS Well-Known Member

    How much for the wheel well trim for a 69 skylark and do you have the rad cross bars I need the lower brackets? thanks Ron
     
  18. Mike Bucy

    Mike Bucy Administrator Staff Member

    :shock: Do not do business using the PM system or email as stated in the posting policy. We need to keep the information public so we know who is in line for what and at what price.

    So far the forum is working out fine. Keep up the good work everyone!
     
  19. George D.

    George D. Platinum Level Contributor

    For Mike:

    My PM to Mark was in regards to the parts I had asked for (the AC parts) and two other smaller parts (the relays on the firewall) in regards to Marks health/ well being. Wanted to see if it was going to be too much of a B*TCH to ship said items in regards to said health/ well being. :beers2:
     
  20. SpecialWagon65

    SpecialWagon65 Ted Nagel

    Mark,
    Do you have a pair of hood hinges for the 69?
    Thanks,
    Ted
     

Share This Page