parting out 2 - 1970 skylarks

Discussion in 'Car Part-Outs' started by painekiller, Sep 4, 2015.

  1. 71lark

    71lark Well-Known Member

    how are the frames?
     
  2. bignastyGS

    bignastyGS Maggot pilot

    Doug, How are the whole cowl areas? Possibly looking for a complete cowl with a good floor section back to the middle of the front seat area..
     
  3. Buickcub

    Buickcub Well-Known Member

    Plastic or metal top radiator cover, looking for good plastic one
     
  4. Lee Bacon

    Lee Bacon Well-Known Member

    Doug looking for the little cup that hold the spare tire board in place?
     
  5. Aidan1976

    Aidan1976 Active Member

    Doug,

    Does the 350 2 barrel engine run? Good compression? And complete - i.e. air cleaner to pan, with all accessories still attached (air con stuff, alternator, power steering etc.)
    And the TH350 shift good?

    If so, willing to ship within the US (to NC)?

    Also, looking for a radio, complete with all mounting hardware (screws, tabs etc. My car's dash is pretty bad in this area). Not concerned if it works or not, just want to fill that ugly hole.

    Any green interior stuff?


    Thanks, Aidan
     
  6. mdavis

    mdavis Member

    Do you have the molding for the rear wheel opening
     
  7. Furious_styles6

    Furious_styles6 Furious_styles6

    Do you have a fan shroud? How much shipped to 28214?
     
  8. Rich Johns

    Rich Johns Platinum Level Contributor

    Doug
    Do you have a bucket of bolts /fasteners from these 70 Skylarks you have parted out?
    Bring the bucket to GS Nats I will buy it from you.
    Let me know?
    rich@purestockauto.com
     
  9. GMan42

    GMan42 Well-Known Member

    do you have a radiator cover, washer bottle, radiator overflow
     
  10. flht25

    flht25 Well-Known Member

    I am interested in the 1969 front disk brakes if you still have them. Shipping to 77384.

    Thanks,
    Jeff

     
  11. Cblay78483

    Cblay78483 Member

    How about front right fender??
    901/486-6862
     
  12. Furious_styles6

    Furious_styles6 Furious_styles6

    I'd like the water pump pulley from the 350 2 bbl. Thanks.
     
  13. Art B

    Art B Well-Known Member

    I am interested in a set of black seat belts with the silver buckle. Date code 08A70.

    Thanks.

    Art B.
     
  14. speedygump

    speedygump speedygump

    Going to give this a little bump!

    Do you you have any AC duct work that is uncracked/ broken?
    If so please let me know how much you would be asking.

    Thanks Chris
     
  15. painekiller

    painekiller Well-Known Member

    What all do you need? I should have some
     
  16. painekiller

    painekiller Well-Known Member

    I will check what I have
     
  17. speedygump

    speedygump speedygump

    one part looks like a wide v Part#1382648
    the other looks like it bumps up behind the passenger side vent and has a rubber cushion on one end.

    I might be interested in a complete system (everything under the dash).

    Thanks
    Chris Feldmann
     
  18. rex362

    rex362 paint clear and drive

    Doug ...I need this duct uncracked

    20161022_231609.jpg


    and the little ash tray part that has the ball bearing thingamajiger that puts tension on the ash tray sliding or a whole setup with a clean like
    not to much used ashtray ?

    20161020_205226.jpg

    tried to send pic in pm but doesn't allow
     
  19. hvramesq

    hvramesq Silver Level contributor

    In line for best rear bumper core. Ty hvramesq
     
  20. 87GN_70GS

    87GN_70GS Well-Known Member

    Did these cars have the X braces in front of the radiator?

    Sent from my SM-G935V using Tapatalk
     

Share This Page