Parting 1964 Skylark some 65 GS

Discussion in 'Parts for sale' started by Chris66, Jan 15, 2019.

  1. Chris66

    Chris66 Member

    1964 Buick Skylark Parts - Pictures on request, thanks

    I am parting a rusty roof vinyl top car.

    Body shell, with good floor pan. Trunk and toe board ext have rust.

    Main floor is nice. $250 whole shell minus the dash which will be cut out.

    Dash panel, good windshield base. $250.00

    Motor V-8 with two speed, runs, leaks oil, doesn't smoke, lot drives $400

    Good dual exhaust, not rusty $100

    Non posi rear end, not sure of ratio, $150.

    Left Front fender, $200

    Left front inner fender $75

    Trunk Lid, no rust $250

    Right Fender needs work $75

    Grill with headlight surrounds, pitted. $150.

    Rear panel with Buick emblem and both trim pieces $225.

    Glove box door with Gran Sport emblem $30

    Headlight mounting panels right side slightly bent $50

    Hood latch with center support $75

    Battery tray L shape support at core support $20

    Pair of hood hinges $100

    Rocker Trim decent $100

    Hard top roof rail stainless weatherstrip channels both sides $100

    quarter glass non tint $25 each

    Doors passenger side good, vent is broken $125

    Drivers side for parts dented $25

    Gran Sport sail panel emblem needs painted $25

    Wheel opening moldings have 3 $75 each

    Front bumper brackets $50

    Rear bumper brackets $50

    Rear bumper core $100

    64 Back up housings pair $75

    Passenger side dash panel non A/c $75

    2 Wheel Center caps some pitting driver $30


    More parts, please ask.

    All plus shipping or pickup

    Located in Rochester, NY area

    Will entertain offers and will bundle to help both of us. Thanks Chris
     
  2. 64 skylark mike

    64 skylark mike Well-Known Member

    Is this an a/c car?
     
  3. Chris66

    Chris66 Member

    Non A/C car
     
  4. 197064buickspec

    197064buickspec 1964 Special Post-455

    Interested Pending condition. Do you have any pictures if the rocker molding a and wheel opening moldings?

    Thanks.
     
  5. BuickGS65

    BuickGS65 '65 Skylark/GS Enthusiast

    Interested in the GS sail panel emblems and the vinyl top trip. Can you post pictures please ? Thanks!
     
  6. yachtsmanbill

    yachtsmanbill Well-Known Member

    Interested in BOTH front fender spears and ONE matching door trim piece for the drivers door for a 1964 Special. Fender spears may be unobtanium; they are 3/4" X 55"L. Also need 6 ventiports for same. Each is separate with 2 attaching pins (with pal nuts) and an antenna for same. I have the cowl base, need bezel and the screw on whip only. Possibly a light blue steering wheel as well.
    Thanks! ws

    z71.jpg

    z47.jpg

    00v0v_456W6yIBcWv_1200x900.jpg

    00i0i_5NsKrLpZU9s_1200x900.jpg
     
  7. Chris66

    Chris66 Member

    64 Vinyl top trim
    I also have some side spear trim as well
     

    Attached Files:

  8. Chris66

    Chris66 Member

    Left front wheel, both rear wheel and sail emblem.
    Minor imperfections as removed from the car need cleaning and polishing
    Studs included on the sait panel emblem
     

    Attached Files:

  9. Chris66

    Chris66 Member

    I haven't found the side spears. I can't recall, I may not have them. I will look...
     
  10. Chris66

    Chris66 Member

    No fender louvers, no steering wheel, was replaced..
     
  11. 6455spd

    6455spd Silver Level contributor

    inline for both of the rear wheel well trim. Also the dash pad available?
     
  12. jmos4

    jmos4 Well-Known Member

    Hi,

    How are the door panels, and rear side panels?

    How are the side trim outside moldings, and do you have all or missing some?

    Regards,
     
  13. BuickGS65

    BuickGS65 '65 Skylark/GS Enthusiast

    Chris - PM sent. Thanks!
     
  14. PGBuick

    PGBuick Well-Known Member

    PM sent, thanks
    Pat
     
  15. BuickGS65

    BuickGS65 '65 Skylark/GS Enthusiast

    I am passing. Thank you.
     
  16. Bill Feiner

    Bill Feiner Member

    Do you still have the fenders? If so do you have detailed pictures if the work the one needs. Just looking for a set of spares.
    Thanks, Bill
     
  17. Chris66

    Chris66 Member

    Yes I do Bill.
    Please send me an email in the messaging section for pictures.
    thanks Chris
     
  18. Thedrew343

    Thedrew343 New Member

    Sent pm about rear bumper
     
  19. la 65 gs

    la 65 gs Well-Known Member

    Interested in the vinyl top trim . Didn't see a price .

    Loren
     
  20. Chris66

    Chris66 Member

    Email sent to you Loren. thanks
     

Share This Page