OEM Bolts with captured washers for hoods,hinges,trunk lids and ?

Here are a bunch of OEM GM bolts with the captured washer. Some of the washers have the edges with spikes on them for holding hoods and hinges to keep them from sliding....trunk lids to.
See some you may need....i can measure them if needed.Nice bolts in great shape for your restoration....you can't by these at the corner hardware store.

$1.00 per bolt plus postage.

Peace WildBill

 

Interested. Six of the upper right and six of the lower right and one or two of all the odd ball ones for a 1969. Can you throw in a couple of the rear taillight bolts and a couple wood screw looking bolts for the bumper supports to frame bolts if you have any (see photo below)? I'd like to get it all to fit in the small USPS box for a $25.00 total with shipping. I can't remember if you do PayPal? Thanks Mike

 

Thanks Bill.

Cheers, Mike

 

Bill, Do you have any of these stamped nuts with the rounded dome?

Cheers, Mike

 

Hey guys...check these pictures. Brett...the two bolts pictured thread into an alternator but the captured washer seems a bit big....

Peace WildBill

 

Hey Bill,

What all has been sold and what is left from the original picture?

Thanks,

Scott

 

Hi Bill,
I'll take the one shown in the photo. Please give me a cost with shipping and I'll do PayPal.

Thanks,
Mike

 

Here 's a picture.