Nylon fasteners for Qtr and door trim mouldings

Discussion in 'Parts wanted' started by scubasteve455, Mar 30, 2018.

  1. DasRottweiler

    DasRottweiler -BuickAddict-

    Screw-in studs for doors:
    Www. TheFastenerWarehouse.com
    Part # 77-4446
    Brian, I am going to go through my molding fasteners , I may be able to help you with the hardware for the quarter window pieces. Will post again later today.... at the very least , I can send one as a sample , so you know what you're looking for.
    I'm curious, do the doors have studs on them to mount peak molding , or are there holes drilled in the doors like the quarter window molding? Jim
     
  2. BrianTrick

    BrianTrick Brian Trick

    If I remember,there are studs and holes.
     
  3. DasRottweiler

    DasRottweiler -BuickAddict-

    Ok, went thru my molding fastener stash.
    I bought these from the website above.
    THESE PART NUMBERS BELOW DO NOT WORK for the door peak moldings. May prevent others from being disappointed.
    A-10318
    477-4703
    A-10617
    A-9850
    If anyone has the correct ones, I need 6 or 7 to finish my trim.
    Brian, I have 3 of the original quarter window peak molding fasteners. If you want I can mail one to you if needed for comparison.
    Jim
     
  4. hugger

    hugger Well-Known Member

    You can trim modern plastic clips to slide in and will work also
     
    Dano likes this.
  5. scubasteve455

    scubasteve455 Well-Known Member

    Jim Thanks ! Good job I think I found the nylon fasteners for the Qtr. Mouldings
     
  6. scubasteve455

    scubasteve455 Well-Known Member

  7. scubasteve455

    scubasteve455 Well-Known Member

    E72891D5-4959-4CB8-8465-E3AD522D9F04.png
     

    Attached Files:

  8. scubasteve455

    scubasteve455 Well-Known Member

    Nice white Buick
     
  9. DasRottweiler

    DasRottweiler -BuickAddict-

    Steve, read above where I listed ones that did not work for me. Pretty sure A-10617 did not work. I'll double check in a few minutes . BrB.....Jim
    And ty, hope to get the white beast on the road within a month or so.....
     
    Last edited: Apr 7, 2018
  10. DasRottweiler

    DasRottweiler -BuickAddict-

    Ok, I managed to pop fastener A-10617 into the door peak molding at the spot provided closest to front of car. Almost impossible to slide fastener towards end or rear of molding. Had to cut fastener in half to get back out. Perhaps I need to sand the wings which clip in a lil and try again till I can slide 7 fasteners into their positions. I have run out of time today, will attempt tomorrow and report results with the A-10617 clip. Jim
     
    DBS likes this.
  11. DasRottweiler

    DasRottweiler -BuickAddict-

    Sorry for being AWoL....
    The above clip doesn't work even after sanding / modification, still on the search.....Jim
     
  12. Harry

    Harry The Hammer

    Last edited: Apr 12, 2018
  13. BrianTrick

    BrianTrick Brian Trick

    5EE59350-92A8-4024-BBED-4E9AD4955C33.jpeg Picture of my passenger door,showing studs.
     
  14. BrunoD

    BrunoD Looking for Fast Eddie

    I think I have a few of those you have in picture,Steve.Let me know how many you need if those are the ones you want.Bruno.
     
  15. DasRottweiler

    DasRottweiler -BuickAddict-

    As I stated above the A-10617 DOES NOT WORK, even after modification. Jim
     
  16. Weisguy184

    Weisguy184 Well-Known Member

    Check with ToddsGS. He has a number of bolts, fasteners, screws and clips. Todd Miller 715-797-7625. If he doesn’t have them I bet he knows where to find them. He is a great guy, I have bought a number of similar parts from him.
     
  17. scubasteve455

    scubasteve455 Well-Known Member

    533C90AF-5B87-4909-891F-3484E5BB073E.jpeg Ok called Aveco found the Qtr fasteners. I have a bunch of door fasteners. But I need (1) metal fastener that goes on the end of the mouldings that attach to the door.
     
  18. scubasteve455

    scubasteve455 Well-Known Member

    This clip is on the edge of door we’re it meets the Qtr.
     
  19. DasRottweiler

    DasRottweiler -BuickAddict-

    Looks alot like the clips for the trunk trim.
     
    Dano likes this.
  20. scubasteve455

    scubasteve455 Well-Known Member

    On the ends of moulding (trunk) Damn need (3)
     
    Dano likes this.

Share This Page