Some of you may recall a parts lot that was for sale in Maryland that included an RV. I acquired the parts and the RV and now selling what I don't need. Feel free to make an offer for all of it if you wish. Located in northern Virginia. Can assist with delivery if not too far away or meet somewhere. I don't want to ship engines, headers. If you are nearby, free to drop by for a look. Get inline for what you are interested in maybe we can work out a package deal. Prices listed are not a shipped price. Chris Buick 455 12:1 racing engine - 6000 obo Notes from Bob - 12:1 Stage 1 race motor, Venolia pistons, polished crank, Poston girdle oil pan, TA 508 cam shaft, Rockers with shaft. Steel heads that have had over 300 hours of porting and polishing on them. 950cfm Barry Grant Carb. I took the manifold off to show someone, so I personally would put rings and bearings in it. Even though it has only 15 runs on it since freshened. Has not been run in 4 years. Buick 455 Short block - 1241735 - Bought as GM crate motor, stock bore, stock cylinders, polished stock rods, Poston cam, double roller, block squared and decked, extendend oil pan last run approx 1996 - 800 Buick 455 TA_2012SCHR, NEW never mounted, 2 1/8in primaries, w/reducers, Nitro plated - 1100 Buick 455 bare stock 73 heads 80 MSD Pro Power Coil- new 100 MSD 6AL - PN 6420 - Ignition module 100 MSD Two Step Module Selector #8739 50 MSD RPM / Retard modules 50 MSD Points Dist Cap with wires - used 40 MSD Points Dist Cap with wires - used 40 Holley Carb - Double Pumper - Prob 750 cfm, milled choke horn, vaccum secondaries 200 Holley Carb - R84013 Date-3129 / 750cfm 100 Holley Carb - List 1850-1 Date-0556 / Model 4160 600cfm 100 Holley misc parts, plates, gaskets 60 ****Can do 400.00 for all carb related parts as a lot*** Holley Fuel Pump 12-802 with regulator 100 Taylor 83653 Plug Wires - new 65 Accel Super coil #140001 - used 30 8in 4000 stall torque converter, built by Fred Frye, 3 runs on it 300 SFI Flex plate 80 TA_1160 Dual Valve Super Springs, 160# NEW 110 Unknown brand Dual Valve Springs 50 Unknown brand Dual Valve Springs 50 70-72 Skylark Glass set - rear, sides - used 120 Kenne Bell Cam - KBMKC118- used 100 455 stock oil pan 100 455 timing cover - 1230864 - '73 60 455 timing cover - 1238864 - '71 60 Double roller timing chain set - used 40 Double springs with pushrods - used 40 455 5/8" oil pickup 40 455 5/8" oil pickup 40 Starter 50 Electric fan 20 Racing seat straps 20 various header, valve cover, exhaust gaskets 60 455 distributor, points, MSD rotor 1112027 0E3 40 455 distributor, points, MSD rotor 1112110 3C25 20 Olds 10-bolt, open, 2.78 I think, 8.5" not pitted 300 IMG_3530 by azstage1 posted Dec 25, 2017 at 10:10 PM IMG_3531 by azstage1 posted Dec 25, 2017 at 10:10 PM IMG_3532 by azstage1 posted Dec 25, 2017 at 10:10 PM IMG_3534 by azstage1 posted Dec 25, 2017 at 10:10 PM IMG_3538 by azstage1 posted Dec 25, 2017 at 10:10 PM IMG_3539 by azstage1 posted Dec 25, 2017 at 10:10 PM IMG_3540 by azstage1 posted Dec 25, 2017 at 10:10 PM IMG_3541 by azstage1 posted Dec 25, 2017 at 10:10 PM IMG_3542 by azstage1 posted Dec 25, 2017 at 10:10 PM IMG_3543 by azstage1 posted Dec 25, 2017 at 10:10 PM IMG_3544 by azstage1 posted Dec 25, 2017 at 10:10 PM IMG_3545 by azstage1 posted Dec 25, 2017 at 10:10 PM IMG_3546 by azstage1 posted Dec 25, 2017 at 10:10 PM IMG_3548 by azstage1 posted Dec 25, 2017 at 10:10 PM IMG_3553 by azstage1 posted Dec 25, 2017 at 10:10 PM IMG_3555 by azstage1 posted Dec 25, 2017 at 10:10 PM IMG_3556 by azstage1 posted Dec 25, 2017 at 10:10 PM IMG_3571 by azstage1 posted Dec 25, 2017 at 10:10 PM IMG_3569 by azstage1 posted Dec 25, 2017 at 10:10 PM
Merry Christmas I'm interested in the headers but you didn't give a price I would like to know a price on them.
Yes looking to sell as a lot for now. If no takers, I'll eventually post pricing by item. I'll try and get further specs on carbs etc..
Quite the deal there fellas. Good luck on the sale Chris,I'd be shocked if someone don't gobble this up soon.
I would be interested in the stock shortblock, headers and sfi flexplate if you split Also interested in the 12to1 complete engine
I have updated the listing with prices. Please get inline for items here before PM'ing. So far I have this for interests. Tony-Rone - Headers Hugger - Headers, Torque converter, flex plate, 12:1 racing motor Sporty - Taylor wires, Olds rear, electric fan
JayZee, I have three carbs. The best one does not have numbers on it since they were milled off. I cannot ID it. Maybe others can ID with pics. Hugger had first interest in flexplate so I'll wait to hear from him. Thanks
I'll take the 110 distributor - Please PM me with the price shipped to 06119 and how you'd like to get paid.
Rhett, that 110 distributor has the counter weights welded. Still interested? Need a pic? send a number or email address if you need more pics.
Will pass on headers and complete engine pm on the way regarding the shortblock,118cam and the flexplate.
I will be going to Lakehurst, NJ next week for a couple of days if that helps anyone out for delivery.