need front speakers for a 75 park avenue

Discussion in 'A boatload of fun' started by garyd, Jun 8, 2019.

  1. garyd

    garyd Well-Known Member

    these go under the dash by the front a pillar. they are held on by a metal bracket that fits around the bottom of the speaker. they are blown out paper and no longe work. the speaker needs to be 8 ohms according to the radio. im using the stock 8 track player
    what brand/ model should i use
     
  2. 12lives

    12lives Engage! - Jean-Luc Picard

  3. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD"

    There is no such thing as a 1975 Buick Park Avenue. Is it an Electra Park Ave? They list speakers in the front doors, rear deck, and side seat panel.
     
  4. Luxus

    Luxus Gold Level Contributor

    Be careful reinstalling the dash after replacing the speakers. The OEM ones are very small and on the drivers side the replacements may not fit without some fiddling with things in the area. If it's not going in, stop and reevaluate what is going on.
     
    66electrafied likes this.
  5. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD"

    Right, but the Park Avenue was a separate model from like 1991-2005?
     
  6. garyd

    garyd Well-Known Member

    im having to have a bracket welded up to fit speakers as the original base was square and new speakers are round. the height is something else i have to look at
     
  7. garyd

    garyd Well-Known Member

    there is a 1975 park avenue made by buick as i have one in my garage. all they were were upgraded electras. when looking for parts i use electra as its the same.
    there are no door speakers, only front dash and rear deck . front speakers are about 2 inches and rear are 6x9 if i recall
     
  8. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD"

    Yes, it's an Electra. The Park Avenue name was used stand alone as a separate model from 1991-2005.
     
  9. Mark Demko

    Mark Demko Well-Known Member

    The 75 Electra Park Ave’s are SWEET:D:p
     

Share This Page