need a little help.

Discussion in 'V-8 Buick Powered Regals' started by Jesse, Sep 21, 2004.

  1. Jesse

    Jesse Active Member

    Hey everyone need a little info i have a thread in the steet 400/430/455 forum. I'd appriciate all the help i can get for my project. Thanks :)
     
  2. 83regal455

    83regal455 Guest

    I went with the TA pads and mounts. But any big car (electra) stuff will work too. I drilled all new holes for mine and i moved it as far back as i could. I didn't have to worry about the hood clearance because i went with a 2 1/4 in cowl hood.

    I can take some pics of my mounts and a front end tie ins if you want. I just pulled my motor yesterday. Let me know.

    Thanks
    Dustin
     
  3. Leviathan

    Leviathan Inmate of the Month

    Interesting, I'd have thought there was too much flex in there for a welded brace! I'd like to see the welds if it's no trouble!

    This link here shows a similar setup to what I use...
     
  4. Jesse

    Jesse Active Member

    Sure that would be great especialy the front end ties. :TU:
     
  5. 83regal455

    83regal455 Guest

    mine are a little different but the principal is the same. I didn't get to the shop last night but i have to go tonight to pick up my trailor. I will take those pics and some of the upper control arms.

    Thanks
    Dustin
     
  6. 83regal455

    83regal455 Guest

    I posted the frame tie ins in their own thread but here are the motor mount pics.

    thanks
    Dustin
     

    Attached Files:

  7. 84ZZ4

    84ZZ4 Well-Known Member

    That's pretty much what mine look like too, although I ended up bolting them down slightly differently...
     

Share This Page