N25 tips ANYONE???

Discussion in 'Parts for sale' started by wheelz, Feb 13, 2014.

  1. wheelz

    wheelz 'B' is for Buick.

    I am about to make up another batch of Stainless Steel N25 tips: 2-1/2 inch and 3 inch. Laser cut. Hand formed. Hand welded. Hand polished. Gorgeous! $335 shipped to any lower 48.
    Additional shipping costs apply to anywhere outside the lower 48.

    NOTE: I need 6 orders MINIMUM to afford a full sheet of polished stainless stock. (8 sets preferred or 16 Pieces uses a full sheet).

    TWO YEARS AGO I had asked for people to pre order and advise me what size they wanted. I had 7 confirmed orders so I manufactured 8 sets.

    Several people who said "THEY WANTED" ~ FAILED to come thru with payment when they were completed and ready ship 6 weeks later.. :rant:
    It took me till this past fall to sell them. There isnt much profit in making these tips, and I simply can not outlay the big money and float these costs for almost two years...so, . . . I am forced to do it differently this time.

    I WILL REQUIRY a $100 deposit. PayPal or check.

    IF YOU WANT A SET of these popular STAINLESS STEEL 2-1/2" or 3" N25 TIPS, get in line here, then PM for your deposit details.

    ONCE I have a minimum of 6 orders, (8 is ideal) I will proceed with ordering materials and begin production.. which requires about 6 weeks...

    Wheelz, Tampa Bay

    Attached Files:

    Last edited: Nov 19, 2015
  2. wheelz

    wheelz 'B' is for Buick.

    ANY BODY? :Do No:
  3. 71GS455N25

    71GS455N25 Silver Level contributor

    I'm in Wheels! Count me in for a set of 2 1/2" Tips. I have seen the quality of the Tips you have produced and they are 2nd to none! Thanks for going out on a limb to repro them for us GS N25 bumper owners!:TU:
  4. Chris Cornett

    Chris Cornett Well-Known Member

    I have a set these are top notch.
  5. John Diaz

    John Diaz Silver Level contributor


    As I've moaned about lately to you, it doesn't seem anybody in the country is reproducting the standard 2" tips anymore.... I'd think you could definitely sell a few of your stainless ones in this size, and I'm guessing Gardner and perhaps PartsPlace might be interested in a few sets as well? You'd be the closest thing to the factory repro out there at this time....
  6. wheelz

    wheelz 'B' is for Buick.

    Thank You for the kudos Chris! :TU:

    John..as per our conversation yesterday... 2 inch tips would certainly HAVE TO MEET exact replication of the originals because I would be dealing with 'purists'.

    (IF you have patience, you can still find NOS original N25's out there..they show up ever-so-often on this site and eBay as well)

    Even tho my tips are designed to allow a shoulder for the larger 2-1/2" and 3" size exhaust, they still appear original once poked thru the bumper cavity.

    For me to manufacture and reproduce 'original appearing chrome plating over formed steel N25 tips' it would require accurate 3D digital blueprint plans, CNC cutters, CNC stamping facility and roller wheel forming technology, and tooling and seam welding and chrome plating... I dont have that kind of money to thro out there...

    Besides, what I've found thru feedback regarding my product over the years, is most guys prefer the larger 2-1/2" exhaust systems anyway!! :Brow:

    I'm just sayin'!

    Wheelz, Tampa Bay
  7. The N25 tips do look amazing. I've been considering these but have a question on what everyone is using for their 2 1/2" mandrel bent muffler back - tail pipe section to line up with the N25 tips??? I guess I can have a muffler shop bend up a set of pipes and crush down the 2 1/2" pipe to some restricted dimension but would prefer a nice N25 2 1/2" free flow mandrel bent system. Any advice appreciated:TU:
  8. wheelz

    wheelz 'B' is for Buick.

    Hey There Mr ForcedInduction guy... BTW a NAME would be real nice! :TU: YES, any quality muffler shop can bend up a set of tailpipes to make the N25 tips fit correctly. . . and then be sure to purchase a set of N25 HANGERS from Steve Caruso (Caruso performance) in Michigan... His hangers are as nice as my tips!!!

    So, be sure to POST 'in line' for a set of tips, so I can count you in on a set, K? :pray:

    Wheelz, Tampa Bay
  9. 70staged

    70staged Well-Known Member

    Wheelz, I am interested but I will need to pm you later with some details about it later. maybe 2 sets I do not know yet.
  10. scubasteve455

    scubasteve455 Well-Known Member

    I am newbie to forum. need a set 21/2 can I have address to send you a check. will the 21/2 fit Gardner exhaust? the brothers knew I had n-25 bumper.
  11. wheelz

    wheelz 'B' is for Buick.

    Scuba Steve... My tips wil work on any exuast system as along as they are made for N25 exhaust systems... STANDARD 'bent down' exhaust pipes will need to be modified to work...

    I dont want any unhappy customers after almost 20+ years of manufacturing N25 tips... so if you gottney questions, just ask!

    Wheelz, Tampa Bay
  12. wheelz

    wheelz 'B' is for Buick.

    Still need more guys to step up! :cool:
  13. StratoBlue72

    StratoBlue72 Well-Known Member

    Check with Kurt Hogan, Hogan's Exhaust. I've got a phone number around here somewhere. He's made several mandrel bent 2-1/2" N-25 tail pipes for people on here.
  14. Is this the Hogan's Exhasut in Topeka Kansas?
    Just did a fast search and they show that they mandrel bend pipe.
    Thanks very much
  15. 71GS455N25

    71GS455N25 Silver Level contributor

    :TU:Hey all you N25 Bumper guys! Wheelz is needing some more guys to step up and commit to buy a Super nice set of 2 1/2" or 3" N25 tips made of polished stainless! I am needing a set made but, he is needing to fill more orders before he can start the manufacturing!
  16. StratoBlue72

    StratoBlue72 Well-Known Member

    That's the one David. He seems like a nice guy to talk with on the phone.
  17. wheelz

    wheelz 'B' is for Buick.

    2 orders for my tips are not going to cut it Guys. . . I need at least 6 orders... IF YOU, or anyone else you may know has considered or thought about buying your LAST SET of N25 tips ever, NOW IS THE TIME!

    These are STAINLESS STEEL.
    They appear AWESOME when installed.
    They will not rust out.
    They can easily be polished if they get scummy.
    ...and they are STILL $325 SHIPPED to any lower 48 ~as long as I can produce 6 sets at the same time. I can produce lesser quantities but will have polished stainless steel sheet waste, and basically pretty much the the same laborous effort, but the costs will increase accordingly.


    Wheelz, Tampa Bay
  18. wheelz

    wheelz 'B' is for Buick.

  19. 1971GSFAN

    1971GSFAN green onions

    Sending a pm:Brow:
  20. 71GS455N25

    71GS455N25 Silver Level contributor

    :3gears:Count me in for a set of 3" Tips

Share This Page