mustang T5 setup out of a sbc g-body

Discussion in 'Parts for sale' started by wagons, Mar 10, 2009.

  1. wagons

    wagons Well-Known Member

    this is out of my buddies 305 malibu wagon, hes going 350/t56 so this setup is for sale. trans is from a 90ish stang, its a worldclass and was rebuilt around 10k ago by a performance tranny guy, stock rebuild with a pro 5.0 shifter(no stick).aftermarket bellhousing to adapt sbc to ford trans, f-body master and slave cylinders, ford fork, throwout bearing, and disc, you'll need a gm pressure plate and pilot bushing. driveshaft(included) is a stock g-body 7.5 one with a ford yoke on it, done by a driveshaft shop of course. trans is drilled and tapped to use a gm mount, crossmember(not included) needs a little modification, the pad the mount bolts to needs to be put on the front of the crossmember.

    $750 or for an additional $250 you can have another stang wordclass T5 that came out of a project car, it worked fine when pulled, comes with the stock ford bellhousing, engine plate, and fork.

    stuff is in CT, i'm in NH so wherever is closer to u is where it can be, shipping is a little iffy, i think the driveshaft is too long to be on a pallet but could be mailed seperately from the trucked trannies. shipping is not included
    [​IMG]
     

Share This Page