I have 1 set of Moser Engineering RACE AXLES 1971 - 1972 Skylark / Cutlass 30 spline Bolt in axles (axles use the A9/Set9 axle bearing and 712146 seal system) 7/16 x 20 x 1.25 studs. (included) 29.75 length from end to end reference picture how to measure. AXLES do not have bearings or seals included 375.00 Will need zip code to figure shipping I also have 29.25" Moser Engineering Race Axles THESE WOULD BE USED IF YOU WERE GOING TO NARROWER YOUR 10 BOLT 8.5 71 72 HOUSING A 1/2" ON EACH SIDE FOR THE NARROWER CAR 64 65 CHASSIS A-BODY . 30 SPLINE (axles use the A9/Set9 axle bearing and 712146 seal system) 7/16 x 20 x 1.25 studs. (included) 29.75 length from end to end reference picture how to measure. AXLES do not have bearings or seals included 375.00 J D JIM AKRON, OH
Jim, I was about to order another set of 30-splines for a 71-72 8.5”.I need the 1/2”x3”,so I could tap them. Are the bearings/seals already pressed on?
You do not want to hope you get the threads in straight and hope you have enough thread in the hole etc. Not worth screwing it up. Jim