Laundry list of parts needed for the 72 X project...ASAP

Discussion in 'Parts wanted' started by Smartin, Oct 27, 2018.

  1. ToddsGS

    ToddsGS Founders Club Member

    Inline does sell the front sway bar mounting brackets if you don't find originals. I stock the correct bolts for mounting it.
     
  2. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

    Good to know...and they might actually send the right parts....might not :D

    I do have a line on a bar and the hardware, so hopefully I don't have to play roulette with Inline.
     
  3. GSX 554

    GSX 554 Gold Level Contributor

    Duane . Are both Braces Curved ??? Thanks Lou
     
  4. CJay

    CJay Supercar owner Staff Member

    Both bars are curved if the car has AC.
     
  5. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

    No AC on this one.
     
  6. Duane

    Duane Member

    The Assembly Manual shows 2 bent braces for 72 and does not give any options for AC vs non-AC. It also shows exactly how they get installed, with which one goes in front and how to install the hose piece between them. Its on page 11-5.1
    Duane
     
  7. tdacton

    tdacton Gold Level Contributor

    Both '72 core support braces will have the curve for A/C or no A/C.
    Troy
     
  8. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

    Got it.

    Looks like I need the BLUE Bowden cable on the back of the heater control. Anyone? Bueller? :D
     

    Attached Files:

  9. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

    Looking for the breather hose and coupler that goes to the grommet on the driver side valve cover.
     
  10. Duane

    Duane Member

    Adam,
    The blue cable and the Hose Coupler went out on Friday. I didn't have a hose.
    Duane
     
  11. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

    Thank you!
     
  12. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

    See first post for updated list.

    Also looking for this clip for the hood latch:

    I just need the one on the actual latch, not the lower latch mechanism.

    EDIT: Clip located....taking it off the list.
     

    Attached Files:

    Last edited: Nov 4, 2018
  13. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

    List updated
     
  14. StratoBlue72

    StratoBlue72 Well-Known Member

    there's a possibility I may have a set of NOS air cleaner foam seals.
     
  15. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

    I would appreciate a look, thanks.
     
  16. Stage 2 iron

    Stage 2 iron 480 IRON HEAD STAGE 2

    Adam I didn't see that stuff posted before I have both lower steering column cover and passenger side valve cover wire harness bracket 71 72 uses a long one 70 had a short one. Have a good rod clip too do you still need a clip for the hood latch rod ?
     
  17. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

    Which two items? I just need the clip in that photo, not the pull.
     
  18. Stage 2 iron

    Stage 2 iron 480 IRON HEAD STAGE 2

    I thought I left the clip on the pull rod I I sent you.
     
  19. Stage 2 iron

    Stage 2 iron 480 IRON HEAD STAGE 2

    Adam PM me your number it's easier to talk.
     
  20. Ryans-GSX

    Ryans-GSX Have fun, life is short.

    Adam I think I have around 10-15 Bumper jacks but you would need to tell me exactly what your looking for. Feel free to PM me or call me at (336) 989-79 two 6. Happy to help if I can.
     

Share This Page