INTAKE GASKET TYPE

Discussion in ''Da Nailhead' started by cool55, Aug 27, 2017.

  1. cool55

    cool55 Well-Known Member

    I had to pull the intake on my 401 to replace a valley cover gasket. The intake gasket I had previously use was a metal core/paper faces type. The Felpro replacement I picked up locally proved to be an all metal gasket. What luck have you guys had with this type and what sealer (instructions recommend it) have you used??

    Thanks guys!
     
  2. TrunkMonkey

    TrunkMonkey Well-Known Member

  3. Bigpig455

    Bigpig455 Fastest of the slow....

    I've had great luck with the Felpro metal gaskets. I hit them with some copper gasket spray, and reuse them if I pull the intake.
     

Share This Page