Heater Core replacement

Discussion in 'The Big Chill' started by Les Modrow, May 19, 2018.

  1. Les Modrow

    Les Modrow Gold Level Contributor

    Does anybody know of an easy way to replace the heater core and blower motor on a 66 Skylark?
    Thank you, Les
     
  2. ragtops

    ragtops Gold Level Contributor

    I have done it on non air cars. There is no easy way. Cut a hole in the inner fender is the only way to replace the blower other than remove the fender and inner fender. It is my opinion the fender and inner fender were meant to be removed/installed as a unit. I have had several cars apart from the 64-67 years and I can't see a way to separate the two pieces without removing them together IF you want to not damage either part.
    You know what it takes to replace the heater core I imagine, if not speak up and someone will chime in, or PM me and we can discuss it on the phone. I don't like to type a long story.
     
  3. Les Modrow

    Les Modrow Gold Level Contributor

    Mike, thank you for your reply, Yes, I do know how to replace the heater core but I thought there might be an easier way to replace the blower motor.
    Thanks again, les
     

Share This Page