Go fast goodies

I'll take the cover. I'll wait to find out on pan and balancer.

 

inline for
Scotty Brown 8.5 to 9.5 Compression Camshaft and Lifters ( details to follow when listed, same run time as above heads ) - $125

 

Inline for a friend on the shorty headers.

 

In Line for the Extended Oil Pan and Pick up Tube Pm coming. Bill

 

Looks like I got Bypassed on some items....I will step right out of line an all items. Good luck.

 

I still want the items I originally posted about.....

 

Really not sure how you got bypassed; your OP showed interest in the timing set and fan/rad setup, you were still 1st up on those items. You edited your post at some point to include your interest in the WP and T/C. Editing an original post to gain access/show interest doesn't seem right or fair to others/me who've committed to purchase but ok. Tx again for your interest.

 

NP Herb - you're first up for those items -- I'm heading out to garage right now to pull engine and hope to have pix of all items soon. Tx.

 

does this put me first in line for rad/fan set up. please advise, details and pics. need dimensions on radiator.

 

Passing on the B4B. Going a different direction.

 

Alright gentleman here's the pix! I also have a few more items to list so here goes ---

TA 455 Spring Compressor Tool -- $55
Stock 455 flex plate -- $35
Stock VCs w/ xtra thick edelbrock gaskets to clear roller rockers + new cap & breather -- $48
Spectre Low Pro Air Cleaner w/ air filters - $85
Spectre Rad hose setup - $35
Cam bearing tool w/ 455 cam bearing mandrel -- $85

 

I'll take the wires and looms

 

And more...

 

Ok per the posts rec'vd here is the order of interest -- please lmk within 24 hrs of your intentions or i move to the next in line -- tx, pm me for payment details

herb -- carb, pan (1st ), rockers, & wires/looms
1stage1 -- meziere wp
436'd - cam/lifters ( 1st )
big joe - balancer, pan ( 2nd ), timing cover
redmanf1 - cam ( 2nd )
buickgsrules - shorty headers, hi torque starter ( 2nd )
bill9066 - pan ( 3rd ), timing chain, hi torque starter

 

What thickness is the cometic and felpro head gaskets?

 

The cometic gaskets Ive got listed are for the Timing Cover ( 2pcs ) the oil pump ( 1pc ) and the front lip of the oil pan. If you need me to Ill mic the open TC cover gasket, the others are still new in the packaging.

The felpro 1125 performance head gaskets are .041 compressed.

Here's a link to them....

http://www.summitracing.com/parts/FEL-1125/

FYI the shorty headers will come with remflex gaskets for the collectors and the barely used ta gaskets for the ports ( they came off nice and clean ).

 

Sorry, my mistake. Thought you had cometic head gaskets too. Inline on starter too.

 

I'm going to pass on the rad/fan set up. to big for my application.
Thanks

 

Various Cometic Gaskets -- $20
ARP Head bolts - $55
FELPRO 1125 head gaskets + a box of misc. various 455 gaskets -- $60

 

I'll take the 1125 gaskets and various misc gaskets.
gary