Full trunk replacement

Discussion in 'Repro Parts' started by Rob Swenton, Sep 11, 2018.

  1. Rob Swenton

    Rob Swenton Active Member

    hello
    I purchased a full reproduction floor from AMD . As you know these are really for a chevelle and have to be slightly modified. Can someone show me the modification steps in detail to make this truck fit correctly? Thanks
     
  2. GSX10/10

    GSX10/10 Well-Known Member

    Check out the following link, it has a pretty good set of photos of the repair. I know the rear section where it bends up from the floor before the first set of bends is where the cut is made. I'm about to tackle the same thing in the next few weeks. Looks pretty straight forward. These guys toook off the rear brace to repair it, but I don't think that is a requirement.

    http://v8tvshow.com/V8TV_2/index.ph...ick-gs-455-stage-one-body-restoration?start=6
     
  3. Duane

    Duane Member

    I think they used one designed for a 69 Chevelle and not a 70-72 like they said. The 69 Chevelle trunk pan uses the same type of brace as the 70-72 Buicks.

    If you check out the Dynacorn pictures you will see what I mean.
    Duane
     

Share This Page