Fuel line Adapter

Discussion in 'Other' started by kack, Jul 6, 2011.

  1. kack

    kack Well-Known Member

    I have a steel pipe and will shift to Rubber Hose. ( Fuel sender from Cheyenne 1991 )
    Where can i find an Adapter.
    Nippel is M16 x 1.5 to 3/8" rubber hose
    and M14 x 1.5 to 5/16" rubber hose. Thanks Goran :)
     

    Attached Files:

  2. bammax

    bammax Well-Known Member

    If all you're doing is connecting rubber fuel line to steel tubing than just put a flare on the steel line without any fitting. Then slip the hose over the flare and clamp it down. The only time you need an adaptor piece like that is if you're connecting a tube and a hose that are completely different sizes.
     
  3. kack

    kack Well-Known Member

    If there are no Adaptors fiting to this, i will do what you suggested.
    Looks like i have to fix two Adaptors M 16 x 1,5 to 3/8" for Fuel Filter.
    All the old pipes are junk, only will use the pipes from the TBI . Thanks Goran
     
  4. kack

    kack Well-Known Member

    Found the right Adaptors in Hydraulick Store in Town. Goran :TU:
     

    Attached Files:

Share This Page