Evaporator Housing Evaporator box Right side

Discussion in 'Parts wanted' started by mummy68, Apr 11, 2019.

  1. mummy68

    mummy68 Silver Level contributor

    Hey Guys

    I am looking for an evaporator box for a 68 Skylark with AC. I just need the right side. The side closest to the engine. I smashed mine while doing the engine swap and it's a bout to get hot here in TX in one second. Please let me know if you have one. Also price and shipping to Plano TX 75093
     
  2. pglade

    pglade Well-Known Member

    I'll check my stash.....may have what you need and ship cost would be easy as I'm in Austin.
     
  3. Matt Knutson

    Matt Knutson Well-Known Member

    I have one here, but, shipping will be expensive.
     
  4. mummy68

    mummy68 Silver Level contributor

    Ok Let me know if you find it
     
  5. pglade

    pglade Well-Known Member

    Here is one that I have ...not perfect and described as follows:

    >This is the pre'71 or pre 72 version since it is the darker color fiberglass. The "later" versions (71 or 72) are the same thing but were made using a lighter grey fiberglass color

    >Some slight discoloring in areas (see pic...I outlined the areas generally)...not terrible but it is there

    >The small tab at the front/middle edge of the box is partially broken off...this is where the clamp that stabilizes the evaporator bulb tube is screwed into the hole at this location. You might be able to glue on a donor piece from your box but I can't guarantee it.

    Price-wise - I'd take $15 for the part + shipping (shipping, via USPostal Priority Mail is around $10).

    Check or MO for payment....no paypal

    Not a perfect piece but it's not one that's sat out in the sun in a salvage place and gotten faded/sunbaked/dried out. I can take more pics, close-ups, etc if you need them.

    I'll be back later today/tonight. No problem if you prefer a nicer piece.....this is an extra half I remembered I had here.

    Thanks IMG_2461.JPG IMG_2462.JPG
     
  6. BrunoD

    BrunoD Looking for Fast Eddie

    I have one that looks almost as new,if the other guy's can't help you .Bruno.
     
  7. mummy68

    mummy68 Silver Level contributor

    Do you have a picture of the one you have and price
     
  8. BrunoD

    BrunoD Looking for Fast Eddie

    OK,lets clear one thing.You just want the cover or the bigger part of it.It looks like that you want the small part,just want to make sure.Bruno.
     
  9. mummy68

    mummy68 Silver Level contributor

    I just want the cover. i just need the side of the cover that is closest to the engine
     
  10. BrunoD

    BrunoD Looking for Fast Eddie

    Yes,give me a couple days ,as I have to wait for my grandson to do it for me.Bruno.
     
  11. BrunoD

    BrunoD Looking for Fast Eddie

    Hope to do it tomorrow,I keep forgetting about sending you pictures of mine.Bruno.
     

Share This Page