Drive shaft loop closeout

Ending production of my bolt in drive shaft safety loops. Listed below is the remaining inventory of finished parts or parts I can finish. First come, first serve. Post here what you want and PM me your shipping ZIP.

NOTE, these can only be used with original trans crossmembers of the correct year and are trans specific.


PN --------------QTY. -------COST ------Application
DSL-014-------- 12 ---------70-----------TH-350 / Manual Skylark, Lemans, Cutlass 68-72 ----------- 5 remaining
DSL-016 -------- 6----------72-----------TH-350 / Manual Chevelle 68-72
DSL-022 ---------1----------70-----------TH-350 / manual 65-67 Lemans
DSL-031 --------12---------80-----------Firebird 67-68 TH-350/manual, Camaro 67-69 TH-350/manual, Nova 68-72 TH-350/manual--------10
DSL-032 ------- 10---------80-----------TH-350 /manual Firebird 69

Remaining quantities in red.

 

Bummer to see you are stopping production Steve. I just put mine in yesterday. Fit was excellent!

 

Do you have one for a 65 skylark w/ th350?

 

This was on the very end of my long list. Nothing in a 1970 GS455 TH400 left or available? Any chance of a last run? It's a REALLY nice item!

 

X2 except for my 71

UticaGeof

 

Eric, I think I have 1. I need a photo of the rear edge of your crossmember.

Frank and Geoff, sorry would need minimum order of 25 to make more.

 

Will DSL-014 work for a 1970 GSX 4 speed?

THanks.

Brian

 

Brian, yes.

 

Steve, im not familiar with your parts. Im curious as to how these bolt in. I have heard of different styles. Interested in part # DSL-014 specifically.

 

Steve,

Count me in for one for the 70 GSX 4 speed shipped to 95050, Santa Clara, CA.

THanks.

Brian

 

Brandon, there is a picture on his website Caruso Performance. They are REALLY nice, no drill, very clever design. It's a shame I missed out!

 

Would a DSL-015 work on any 68-72 a-body TH400? If so, I'll take one

 

Steve
I need 2 for the 69 GTO and 70 GS GM A Body 4 speed.
Can I pay and pick up at a Pure Stock Drag event later this year?
Email me direct at
rich@purestockauto.com

 

Rhett, DSL-015 is Chevelle only. They used tubular crossmembers. BOP used stamped cross members.


Rich, You can Pay pal to steve@carusoperformance.com or mail check/MO. Will deliver to Pure stock.

 

I'll bet that if you put it out there, you'll get 25 orders for the 68-72 Buick A-body

.. specify pre-paid only. I'll take 1 for sure :idea2: :TU:

 

Yeah...I would prepay, also. I think many peeps might be like me, you need a lot of parts, but the loop you don't need 'til you are really ready! Maybe if peeps realize it's a last chance deal, they will pony up.

 

It is out there, that's what this is. If 25 people want them I will do another run for TH-400 Skylarks.

 

Steve,
I need one for my GS and for the Bird....if you are doing another run!

 

Count me in for one for a Buick TH400 if you make them.

 

I would be down for one also, Let me know if you get enough people to do another run and I can send out payment.:TU: