Defrost duct install help....

Discussion in 'The Big Chill' started by rex362, Apr 14, 2019.

  1. rex362

    rex362 paint clear and drive

    Cant seem to get the defrost duct in place ,wrestled with it for a while and just got frustrated and turned the lights off in garage and walked away ..cant seem to get it over the heater box vent location...there any trick to this ?
     
    Last edited: Apr 14, 2019
  2. Duane

    Duane Member

    I believe you have to put the duct in first. It is held at the top by twisting the tabs of the steel dash face, then the heater box goes in.

    If I remember correctly that duct is the first piece you install after the firewall insulation pad.
    Duane
     
  3. CJay

    CJay Supercar owner Staff Member

    Yes, Duane is correct as usual. Everything comes out to replace that duct.
     
  4. rex362

    rex362 paint clear and drive

    ok ...so heater box has to come loose ....

    that explains it ....thanks guys
    I will be prepared for it on next restore job
     
    Last edited: Apr 14, 2019
  5. copperheadgs1

    copperheadgs1 copperheadgs1

    Here is the million dollar question. How did you get it out?
     
    taf44667 likes this.
  6. rex362

    rex362 paint clear and drive

    was 15 years ago ...this old brain couldn't recall , also original was cracked /brittle
     

Share This Page