Crank pulley ????

Discussion in 'The Bench' started by Redmanf1, Aug 23, 2019.

  1. Redmanf1

    Redmanf1 Gold Level Contributor

    I have the pulley that I thought was removed from my 72 convertible but they could have mixed up.
    This one has no part number, the other confusing thing is that is a Cast pulley. From what I know it is supposed to be a stamped steel 1235777.
    Anybody know if this is correct for a 72 stage-1?
    I am starting to get the drivetrain together.
    Thank you for any help
    Nelson




    .
    ​
    m1.jpg pu1.jpg pu2.jpg
     
    Redmanf1, Aug 23, 2019
    #1
  2. agetnt9

    agetnt9 Agetnt9 (Dan)

    That pulley must be of a tank....:confused:
     
    agetnt9, Aug 23, 2019
    #2
    scubasteve455 likes this.
  3. Redmanf1

    Redmanf1 Gold Level Contributor

    Yes, it weights a ton...
     
    Redmanf1, Aug 23, 2019
    #3
  4. telriv

    telriv Founders Club Member

    Usually the cast pulleys are used with aftermarket A/C additions from back in the day.
     
    telriv, Aug 23, 2019
    #4
  5. Redmanf1

    Redmanf1 Gold Level Contributor

    Well I have not had a car with aftermarket AC but who knows how I ended up with it.
     
    Redmanf1, Aug 23, 2019
    #5
  6. Redmanf1

    Redmanf1 Gold Level Contributor

    Seems hard to find..
     
    Last edited: Aug 27, 2019
    Redmanf1, Aug 23, 2019
    #6
    yachtsmanbill likes this.
  7. Duane

    Duane Member

    Nelson,
    I thought you might find this interesting.

    It explains what you have, and it is probably a very rare part!

    Enjoy.
    Duane


    1972 Buick Cast Iron Pulleys.jpg
     
    Last edited: Aug 25, 2019
    Duane, Aug 25, 2019
    #7
    scubasteve455 likes this.
  8. bignastyGS

    bignastyGS Maggot pilot

    I'd keep that pulley on for sure..
     
    bignastyGS, Aug 25, 2019
    #8
  9. Redmanf1

    Redmanf1 Gold Level Contributor

    Duane,
    Thank you for the info.
    Nelson    ​


     
    Redmanf1, Aug 27, 2019
    #9

Share This Page