Crane electric kit and msd

Discussion in 'Street/strip 400/430/455' started by 70 GMuscle, Feb 25, 2019.

  1. 70 GMuscle

    70 GMuscle Plan B

    which wiring do you use to trigger msd for the crane electric conversion kit in a stock points converted distributor
    I called msd and they did not know.
    I have the msd distributor but miss stock appearing and of course vacuum advance.
    If crane does not work.
    What are my options
    One thing is car ran great w that kit and a pertronix coil and stock Resto wires, lol.
    Would like to upgrade while engine is out.
    Thank you
     
  2. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD" Staff Member

    CraneXriInstall.JPG
    If I had to try this, I would hook black/red wire to the ignition switch AND the small red wire of the MSD box. I would hook the black/yellow wire to the white wire of the MSD box. All other connections for the MSD box are the same. Big Red and Black wires to battery, small orange and black wires to coil + and - respectively.

    It should be the same way you hook a Pertronix to an MSD box.

    MSDPertronix.jpg
     
    Last edited: Feb 25, 2019
    Dadrider likes this.
  3. 70 GMuscle

    70 GMuscle Plan B

    Thank you sir.
    I will let you know when I get car back together.
     

Share This Page