Cowl Panel Shoulders(?)

Discussion in 'Color is everything!' started by Bridgford, May 29, 2017.

  1. Bridgford

    Bridgford OK, no progress in 11 yr

    Greetings,

    I removed the front fenders and core support a couple of weeks ago and discovered that the fenders are ok, but the cowl panel shoulders are gone at the bottom where all of the crap settled at the bottom. I found the usual Goodmark pieces, but then I stumbled across these (last 2 at the bottom of the page) which seem to good to be true. My question is, is this assembly common to all 1968 through 1972 GM A-Bodies? The website doesn't do Buicks, and minimal GTO and 442 stuff is available.

    Since I haven't embedded a link before, this is the page with the parts: http://eastcoastchevelle.com/productview.php?cat=Sheet Metal&id=1358947377&sectionPID=1

    Thanks,

    Dale
     
  2. hugger

    hugger Well-Known Member

    Same animal, you probably just need the $53 outer skin
     
  3. scubasteve455

    scubasteve455 Well-Known Member

    Nobody will ever see it. Cut sheet metal to fit. Weld or 2/part epoxy. My car was from New Mexico and that's the only spot I had that rusted through.
     

Share This Page