Buildsheet information

Discussion in 'The "Paper Trail"' started by 66electrafied, Jul 27, 2015.

  1. 66electrafied

    66electrafied Just tossing in my nickel's worth

    I once had but unfortunately lost the buildsheet to my Wildcat convertible, and, I wouldn't mind getting one for the Electra. Both cars were built in the US and then sold through Canadian dealers, the Wildcat at Jimmy Pattison's in Richmond BC, and the Electra in Lethbridge Alberta. Any idea if they are available and who I could contact if they are?
     
  2. 64 Hardtop

    64 Hardtop Founders Club Member

    I would try GM of Canada, if your cars were sold there they will have the information. I tried with my GSX but no luck. Good luck to ya.
     
  3. Rivman

    Rivman Senior Ottawa Buick Guy

    I can get you an official GM Canada contact for all that info Marc, and it is not free, about $40 with printed, detailed info on the vehicles and the selling dealers.
    It's available for all GM vehicles built in the US, and exported to Canada. A friend has the contact info, and I'll ask him at cruise night tomorrow -
    I'll post it here as others may be interested in the contact too ! :beer :TU:
     
  4. 66electrafied

    66electrafied Just tossing in my nickel's worth

    Thanks! that would be much appreciated!
     
  5. Rivman

    Rivman Senior Ottawa Buick Guy

    Here you go Marc, and anyone else who wants info on their GM vehicles exported from the US, and sold in Canada:

    GM of Canada,
    Att: Mr. George Zapora
    1908 Colonel Sam Drive
    Oshawa, Ontario
    L1H 8P7


    or phone: 888-467-6853 or, 905-440-7636

    There is a fee for this service, that used to be $40 Cndn - not sure what the cost is now.
    Hope this helps ! :TU:
     
  6. 66electrafied

    66electrafied Just tossing in my nickel's worth

    Thanks very much! I'll give it a try when I get back home!
     
  7. buford27

    buford27 '57 Special

Share This Page