BMR 2 inch lowering springs

Discussion in 'The whoa and the sway.' started by Christopher Spouse Drew, Feb 7, 2019.

  1. Christopher Spouse Drew

    Christopher Spouse Drew Well-Known Member

  2. Darron72Skylark

    Darron72Skylark Well-Known Member

    I have linear rate springs from a different supplier with a 2 inch drop. If you like progressive springs those BMR ones are probably good. No firsthand experience but never heard bad things either.
    I’m using the KYB Gas-a-just shocks. They are way better than the worn out ones they replaced, but a little weak for the setup I’m running now. Will probably swap them out before too long. But for the price, pretty good, especially on the street.
     
  3. Christopher Spouse Drew

    Christopher Spouse Drew Well-Known Member

    Okay good to know! How does the stance look? Happy with it?
     
  4. Darron72Skylark

    Darron72Skylark Well-Known Member

    Stance is good, if I were doing it over I’d go with a 1 inch drop. Of course, I have an additional 1/2 inch drop in the front from tall ball joints.
    I have a little fender rubbing that I attribute to being slightly too low.
    If you are planning to autocross, the KYB Gas-A-Just is probably too soft. Viking, Bilstein or UMI shocks would probably work better
     

Share This Page