Anyone verify this intake for me

Discussion in 'Small Block Tech' started by Wauscion, Oct 27, 2019.

  1. Wauscion

    Wauscion Active Member

    I have a 70 Skylark 2bbl 350 and would like to upgrade to a 4bbl. I have a 73 intake that I dont think will work. I found this one and think it is for a 74. Thoughts? Thanks
     

    Attached Files:

  2. alec296

    alec296 i need another buick

    Should work. Has the emissions equipment blocked off. Get a distributer recurve kit. You should get a 4 barrel accelerator cable also.
     
  3. flynbuick

    flynbuick Guest

    Advertise on this board under “parts wanted” for the correct 70 year intake and carburetor. Look for a 70. 71 is your second choice.
     
    Wauscion likes this.
  4. MrSony

    MrSony Well-Known Member

    That's my intake off my '76 350. :p
     
  5. stk3171

    stk3171 Well-Known Member

    that is the 74 intake. It may have 74 on the bottom.
     
  6. Gallagher

    Gallagher Founders Club Member

    That should work.
     
  7. Wauscion

    Wauscion Active Member

    I have this IM currently. I misunderstood while researching that it had to be a 68/70 4bbl intake manifold. I can try to get better pictures for id'ing. If this one would work then I can find a carb and start my winter project. Any other changes recommended while tearing down the top such as cam, waterpump, timing chain etc... I am looking for a setup closer to my Harley. (Loud and Torquey) nice cruiser 70/75 mph cruiser.
     

    Attached Files:

  8. alec296

    alec296 i need another buick

    The 73-74 manifold should still fit but the emissions equipment makes performance alittle less. But if you need to add linkage to carb for a possible trans change the later intakes may work better.
     
  9. MrSony

    MrSony Well-Known Member

    There wont be any emissions equipment if he doesnt install it. :p
     
    Wauscion likes this.
  10. Mark Demko

    Mark Demko Well-Known Member

    Going by the EGR valve and no evidence of A.I.R. Passages in the manifold, I’m gonna say 1975
     

Share This Page