Looking for the trans cooler line 5/16” double push-in clip on the frame as well as the little clip that secures the vacuum modulator vacuum line to the trans dipstick tube. Trans is a TH350 if that matters. Thanks!
Inline Tube should have both. I don’t know if I have the frame clip,but this 71 TH350 has the metal clip and the plastic strap for the lockdown cable. I will get better pictures tonight. I had this one in my phone.
The frame clip: https://www.gmpartsdirect.com/oem-parts/gm-f--s-clip-1380949 It'll need to be painted but get some Krylon gloss "Sun Yellow" and you're good to go. Always use genuine GM parts.
Bob,I have the frame clip and the other one,but I read somewhere that the small clip was for the SBB,not the BBB.But again,I have it.Bruno.
Looks like GM is still making the frame clip, so I’ll get that one from them, and the trans modulator line one from Inline. Thanks for the suggestions and help!
The vacuum modulator line clip from Inline is INL10200 and the GM frame clip number per Brett is 1380949. The frame clip from Inline is CLP113, and if you need the c-shaped clips that attach the trans cooler lines to each other, the Inline part number is INL10552.
