71 gs column to floor conversion

Discussion in 'The "Juice Box"' started by kevinwalsh72, Sep 19, 2004.

  1. kevinwalsh72

    kevinwalsh72 Well-Known Member

    i need to know location of hole for floor shift automatic cable on my 71 gs
     
  2. staged70

    staged70 RIP

    Kevin , I did this and I got my carpet out and mounted the console with the shifter in it and then removed the console leaving the shifter in place . Then just marked a hole that would not make the cable bind and still be onder the console .
     
  3. BA

    BA Well-Known Member

    Kevin,

    If you remove the carpet around the shifter area you should see small dimples in the floor board. These are line-ups for the shifter and cable.You will need to find the one for the cable and enlarge it to approx.1" this will allow the cable and cable boot to attach to the floor.


    Bill
     
  4. GStage1

    GStage1 Always looking for parts!

  5. BA

    BA Well-Known Member

    Hey George,

    Very nice article. Where were you approximately 20 years ago when I really needed this ?????????? :) :)


    Bill
     
  6. GStage1

    GStage1 Always looking for parts!

    I was probably working on my Buick but the internet was not popular! :laugh:
     

Share This Page