69 GS400 4 speed setup

Discussion in 'Parts for sale' started by bill van steen, Jan 9, 2009.

  1. bill van steen

    bill van steen Well-Known Member

    I have a complete 4speed set up for a 69400, includes flywheel,tranny,bellhousing,pedals,steering column,shifter,driveshaft,carburetor,and I believe dash cluster, all are used pieces and will need going thru.Parts located on Vancouver Island and can get them to Seattle or vancouver for a small fee. Convert your auto to a stick before spring. 2500 US , This stuff was all bought from David Roth and he has shown interest so has first dibs. Thanks bill
     
  2. George D.

    George D. Platinum Level Contributor

    Bill- sent you a PM..... :TU:
     
  3. MGSCP

    MGSCP Guest

    pix....:puzzled:
     
  4. Aerobatix

    Aerobatix Well-Known Member

    This will work on a 70 as well correct? I beleive things are the same for 68-72? If so put me in line to BUY!

    Thanks!!
     
  5. wheelz

    wheelz 'B' is for Buick.

    Rob...FYI, 1968 manual trans stuff doesnt have a backdrive setup at all...ie: the ignition is on the dash, NOT on the column for a lockout mechanism! SO you need to look for 69-72 manual shift stuff... AND the 69 setup uses a slightly modified backdrive assembly..there is a bracket that mounts to the tranny side cover that utilizes the backdrive pivot rod instead of a 'shoulder shaft bolt' (Mike Garrison repros these!) that screw into the trans shift lever...so to make it absolutely correct for your 70, you will need the right backdrive setup. Wheelz, Tampa Bay
     
  6. skylark67dt

    skylark67dt Well-Known Member

    i am very interested in the parts available...thanks .... pete
     
  7. bill van steen

    bill van steen Well-Known Member

    My biggest problem is shipping all these pieces guys, Rick Henderson comes up to my place from timke to time so I can get it to Seattle but shipping would be big I think as there is four boxes and the driveshaft and tranny. IF you are seriously interested after you post please pm me as I will take those seriously. As for pix I can't get any till tuesday as this stuff is at my ware house, what are you looking for? Bill
     
  8. MGSCP

    MGSCP Guest

    Bill I'm looking for the back drive bell-crank... and the rod that goes from the reverse lever to the bell-crank.....

    see if you have any extras :idea2:

    here's my ad from the parts wanted section

    http://v8buick.com/showthread.php?t=124774

    :3gears: :bglasses: :TU:
     
  9. bill van steen

    bill van steen Well-Known Member

  10. George D.

    George D. Platinum Level Contributor

    Bill, do you still have the floor hump with it?
     
  11. davidwroth

    davidwroth Well-Known Member

    Hi Bill, thanks but I am going to pass. But for the record...this is the COMPLETE set up....everything!!! It would take a LONG time to find all this stuff unless you had a 4 speed parts car. Good deal! :beer
     
  12. soda pop

    soda pop Well-Known Member

    I have a few questions?
    would this trans be a M21 or M22?
    included ? presure plate and clutch , cross member, wiring for rev lights.
    and does the input shaft turn freely on trans?

    thank you
     
  13. bill van steen

    bill van steen Well-Known Member

    Yes George hump is there, David removed everything from the car related to fourspeed, including crossmember and dsh cluster, steering column etc, I going to pull all of it out of storage this week, surprisingly enough someone has now got what was remaining of the car and is going to restore it, he could really up the value with this stuff, even the correct carb is there Bill
     
  14. George D.

    George D. Platinum Level Contributor

    I believe he sent you a PM, correct? I am looking forward to that cars completion. Like the Stage, I am kicking myself for letting it go..
    I know what is there and will put my name in the hat. If I decide to buy it, I am sure we both know whose garage it'll end up in (hi Chris :laugh: )
     
  15. davidwroth

    davidwroth Well-Known Member

    Oh yeah... the carb is there also!!!!!!!:dollar:
     
  16. George D.

    George D. Platinum Level Contributor

    I feel for the schmuck that tracked down that carb... I am SURE it wasn't easy :rant: :spank: :3gears:
     
  17. soda pop

    soda pop Well-Known Member

    pm sent
     

Share This Page