69 front brake conversation

Discussion in 'Pro-Touring' started by 69_Rivieraa, Apr 2, 2018.

  1. 69_Rivieraa

    69_Rivieraa Active Member

  2. Troys69GS

    Troys69GS Well-Known Member

    Just cut the bosses off the spindle and put brakes on. You'll just need a machine shop.
     
  3. 69_Rivieraa

    69_Rivieraa Active Member

    I am completely lost at what you have said.... spindle boss ??? What year Car do I used for the parts I need ??
     
  4. Troys69GS

    Troys69GS Well-Known Member

    On the spindle is a square area that the drum backing plate attaches to. This is machined off to allow stock parts to be attached. Black 70 Buick aka Chad, might be a better resource for how to go about it. Provided the wheel pattern is the same for 70, I think he converted. The spindle dimensions where the bearings sit are the crucial areas to match up. In my a body, I used factory parts after machine work was done. Somewhere in here I had pictures, but it's been 9 years.....m
     
  5. Troys69GS

    Troys69GS Well-Known Member

  6. 69_Rivieraa

    69_Rivieraa Active Member

    Yup, thanks
     

Share This Page