The frame is off a 4 door 1972 Skylark for $425.00, rust free and very straight with the only problem being the front bumper bolts pulled a little on the hole they mount towards the front, very minor. The front stub and rear stub can easily be used to repair your convertible or coupe if your center frame rails are good. I can cut into the rails so you can take it apart correctly on the welds. It is very hard to ship an entire frame today with the regular freight companies, much easier if it was cut in half on placed on a pallet. Or if you want just the front horns and rear section that tends to get bent, shipping can go with Fed Ex. I have sold the front horns on Ebay for $150.00 each in the past so your still ahead if you do that. I also have a 70 Monte Carlo frame which the center rails are the same as your 2 door, those are 300.00 pair if needed, then you can have a full frame. Paypal gladly accepted as Sales, invoice for the part first, then the second invoice for the exact shipping cost. Glendale, Arizona Joe 602-298-7090
Forgot to mention, if your building a 100 point car, the rear arches above the rear end is not as wide as the 70-72.
Now parting this frame for the front rails (horns) 140.00 ea and rear area too. I have one rear frame section that is super nice too, it goes in pasted the second mounting holes for 125.00. Also have pit free suspension for sale that came off this car. Joe
