67 GS400 Convertible and Hardtop...Package or Seperate

Discussion in 'Cars for sale' started by twolfinger, Sep 5, 2011.

  1. twolfinger

    twolfinger Fly Eagles Fly

    67 GS400 Convertible and Hardtop...Package or Seperate..UPDATED PRICING!

    All,

    Selling two 67 GS 400s.

    Convertible -
    - '74 455 block decked
    - '70 Stage 1 heads fully ported and polished with fresh valve job
    - TA 413, Edelbrock b4b aluminum manifold, freshly built QJet to Stage 1 specs by TechG8 on the board
    - TA headers, aluminum 2.5 exhaust with x pipe and flowmaster 40s
    - all new tubular adjustable SPC UCA, Howe tall upper and lower Ball joints, moog steering components
    - New Eibach Pro Kit Springs and Billstein shocks on all 4 corners
    - New Fuel tank, sending unit, holley blue pump, aluminum radiator, power booster, master cylinder and CPP proportioning valve that mounts to the MC
    - 2002 Trans Am Front disc brakes mounted on stock drum spindles, have rears but not mounted
    - Monte Carlo SS steering gear with 2.5 lock to lock
    - Console car with all wheel mouldings, GS grill, scoops, emblems, etc..
    - American Eagle Torq Thrust 2 17x8 with 245/45
    - Front clip was just blasted, metal replaced and primered as well as light coating of bedliner under the fenders to resist future rot.
    - Needs quarter work on both sides, but I have two full quarters from a 66 coupe that go with as well as 2 full length body line down patch panels that are heavy gauge steel and stamped from early 80s not the cheap stuff that is out now. Front passenger side floor needs patch or replacement.
    http://www.youtube.com/watch?v=xTVO98deTns
    https://picasaweb.google.com/117746777720004159591/67GS#
    https://picasaweb.google.com/117746777720004159591/FrontEndAndReplacementQuarters#
    https://picasaweb.google.com/117746777720004159591/GSInteriorAndMisc#
    https://picasaweb.google.com/117746777720004159591/GS400FrontSuspension#


    Hardtop - note - the white hardtop in photos above is not this car
    - Complete, bench seat car that needs fenders and quarter panel work - have the full patch panels and full quarters that go with package
    - Been under a tented overhang for 15 years
    - Entire matching driveline there
    - 4 good styled steel wheels from 67 with caps
    - Interior looks like the day it rolled off the showroom, perfect dash pad, front and rear bench, door panels, etc.. even all of the mouldings and air condition vents are there.
    - does not have star wars air cleaner


    Looking to package both cars including the 2 full quarters, 2 full length quarter patch panels, 2 extra GS grilles in excellent shape (no egg crating is broken on either and has mouldings!), 2 sets of gs bezels and anything else I can find laying around, but will seperate as well.

    Asking $9k for both cars and extra parts
    or $8000 for the convertible and choice of quarters
    or $2k for hardtop and a set of quarters
    Will consider all offers. Not sure what the economy will bare and want these gone before end of month. Have my eye on a car already so cash talks. I will not be insulted and you never know what i will take so offer away.

    Tom
    -
     

    Attached Files:

    Last edited: Sep 19, 2011
  2. Jclstrike

    Jclstrike Well-Known Member

    Hi might be interested in the vert and replacement rear quarters for it. is it drivable? complete? and where is it located?
     
  3. twolfinger

    twolfinger Fly Eagles Fly

    Gary,

    I have been building for the past 3 years and it is fully drivable. I put it on the road for the first time this spring. Registered, inspected and clear NH title. Located in Bedford, NH.

    Tom
     
  4. twolfinger

    twolfinger Fly Eagles Fly

    Fixed the first link.
     
  5. twolfinger

    twolfinger Fly Eagles Fly

    bump. still for sale. Will seperate if anyone is interested in the vert or the hardtop car.
     
  6. twolfinger

    twolfinger Fly Eagles Fly

    Updated pricing, make an offer on both or either.
     
  7. jim de

    jim de New Member

    need a right rear wheelwell moulding? 67gs.
     
  8. Chi-Town67

    Chi-Town67 Gold Level Contributor

    This thread is 9yrs old, you might want to post something in the "parts wanted" forum and you may get better results. Good luck!

    If you can't find what you're looking for, I happen to have an NOS RR Sportwagon molding that could be shortened to fit a GS, according to what i've read.
     

Share This Page