'67 GS Motor mounts and Frame pads

Discussion in '"Pay It Forward"' started by mlh48, Oct 1, 2003.

  1. mlh48

    mlh48 Well-Known Member

    I have a set of used motor mounts and frame pads from a '67 GS400. The driver's side mount needs rebuilding and they would both be good cores to have rebuilt. I just replaced mine when I did the engine rebuild and did not have time to send them out. It sure was an eye opening experience when I found out how much replacements were and their limited availability.

    Here's the deal, if you want them I will box them up and ship them to you for the cost of shipping. I could not stand to throw them away. :grin: :grin:
     
  2. txgwildcat

    txgwildcat Guest

    I need those, I'm putting a 455 in my '67 Convertible.

    Thanks!
     
  3. mlh48

    mlh48 Well-Known Member

    E-mail or PM your address.
     
  4. txgwildcat

    txgwildcat Guest

    LaMarr,
    Look what I found, are you still looking for this.....
     

    Attached Files:

  5. mlh48

    mlh48 Well-Known Member

    The mounts are spoken for and will be shipped Friday!

    Good luck with the swap!:grin:
     
  6. txgwildcat

    txgwildcat Guest

    :TU: Timing couldn't be better. It is going to cool down to the 90's by next week and I'll be able to work on the '67 now that all the pieces are in place (Thanks again Ricknmel67 for the oil pans). October is usually the best month here for cruising in a convertible. The better half is on my case to get it it going.
     
  7. txgwildcat

    txgwildcat Guest

    Thanks for the frame mounts LaMarr, wish you could have found those motor mounts for me. If anyone has some please let me know. What vendors stock them?
     
  8. Larry Gibson

    Larry Gibson Platinum Level Contributor

    Frame mounts

    Can you post the #'s from the frame pads. I have a frame pad that I am trying to identify. The part number is B-1380118-1. I was told it was for a 66-67 GS 400 but am not sure.

    Thanks,

    Larry
     
  9. txgwildcat

    txgwildcat Guest

    The ones I have are 1380116 and 1380117.
     
  10. Larry Gibson

    Larry Gibson Platinum Level Contributor

    Frame Mount #"s

    Thanks for posting the numbers from the frame pads!

    Larry
     

Share This Page