Removed from a 1967 GS 400. It was working properly when removed. The AM/FM bar moves left and right smoothly and the AM & FM dials are properly displayed. The on/off knob clicks on and goes smoothly to its limit and the inner knob has a detent in center and rotates properly left and right from center position. The right side knob moves smoothly and as it rotates the dial indicator needle moves from side to side through all stations. All of the station selection buttons operate properly and move the dial indicator needle to the station they are set to. The radio has not been powered up after its removal because it must be connected to speakers when turned on or internal damage will occur. The photos of the illuminated dials were shot by shining a LED beam into the radio's bulb aperture and photographing in the dark. GM DELCO model # or part # is 7298914. (SEE PHOTOS) Included with this AM/FM radio is a NOS Delco #7299124 (Fader) Control Assembly and a (# 1600351) 4" X 10" 10 (Ten) OHM Speaker. Instructions to add the fader control included. Eight (8) to Ten (10) OHM speakers are MANDATORY for this radio. Asking $475 for a very hard to find in great condition stereo + speaker.
I have a 69 A body multiplex system. Someone will be happy to get your system. That is a nice find . GLWS
