65 Prostreet

Discussion in 'Street/strip 400/430/455' started by hugger, Aug 10, 2020.

  1. hugger

    hugger Well-Known Member

    Well here I go again,..same ole story haha
    I'm sure this will look familiar to most of you,...I bought it,...didn't get what I was hoping for,..but nothing new there. Today 2.jpg
    Here's a few b4 pics
    65 Body.jpg 65 Frame.jpg
    65 Tubs.jpg
    So pretty much everything that looks good was destroyed or pretty well fubarred from the fire,...basically starting over
    20200807_134813.jpg 20200807_134827.jpg 20200807_134823.jpg
    Coilovers were destroyed,..wheels are junk,...brake calipers will need to be rebuilt and freshened up,...the diff will need to be rebuilt as the bearings are rusted,..panhard bushings were destroyed,..frame needs some more welding and bracing done.

    Appears to square and straight best I can tell
    It is an Art Morrison "Pro Street" setup. Recieved it last Friday and here is how the weekend went
    20200809_142251.jpg 20200809_152000.jpg
    Blasted the Strange Aluminum center chunk today along with the rod ends and misc stuff will get that stuff all dolled up this week and repaint the frame after I address the welding it needs.
    20200807_134850.jpg
    Body is ROUGH,...the roof will be replaced,..the LH 1/4 will be a CHALLENGE,..as it is warped beyond belief as is the tops of the fenders,..dash panel,..cowl screen,...and driver door,...hood and deck lid were beyond destroyed,..the tubs are pretty warped as well but can be repaired
     
    Last edited: Aug 10, 2020
  2. hugger

    hugger Well-Known Member

    Powertrain will be what all true Prostreet cars must have,....a 871 Blower,..sitting on a mild 462 to get started and then I'll do a nice forged rod setup probably based off a 400 or 430 block for the increased cylinder wall thickness it provides

    Wheel and tire package has been ordered and is the most $ I've ever spent on wheels haha,..but this build is getting the best I can possibly afford it will be close to 8weeks b4 they are ready so I'll wait and reveal those when they are bolted on the finished chassis

    Performance goal is pretty mundane for now 700ish hp and some mid 6's in the 1/8th ultimate goal is mid 5s when I get a nice long block under it
     
    patwhac, rmstg2, no1oldsfan and 10 others like this.
  3. buicksWILD

    buicksWILD Well-Known Member

    Good luck and keep this updated.
     
  4. Bens99gtp

    Bens99gtp Well-Known Member

    I'm sure you will get it ironed out.....if anyone can it will be you
     
    Mart likes this.
  5. hugger

    hugger Well-Known Member

    What sucks is I had a perfect 64 post body few years ago and give it away,...could ve swapped the tubs over and been done in a weekend
     
  6. hugger

    hugger Well-Known Member

    Wait till you fellas see what I got comin!!
     
    OHC JOE and BUQUICK like this.
  7. 455monte

    455monte Well-Known Member

    Following for updates!
     
  8. Following as well!
     
  9. DasRottweiler

    DasRottweiler -BuickAddict-

    In for a penny in for a pound. Following....Jim
     
  10. hugger

    hugger Well-Known Member

    Let's just say the bank called today and asked if my card had been stolen ha
     
    GS464, 1972Mach1, Bill Nuttle and 7 others like this.
  11. 12lives

    12lives Control the controllable, let the rest go

  12. gs66

    gs66 Silver Level contributor

    This will be such a cool car when finished!
     
  13. Mart

    Mart Gold level member

    Nathan is the go to guy for a project like this.
    Just get-r-done!
     
  14. hugger

    hugger Well-Known Member

    2-1536067481107@2x.jpg 1967-Chevelle-SS-396-28.jpg
    Either "Midnight Aqua" or I've always really liked "Tahoe Turquoise" one of these two I feel pretty sure
     
  15. hugger

    hugger Well-Known Member

    z191-SANDER-SPORTSMAN-DRAG-2.jpg
    Sanders is the wheel choice they are being built now
     
    Last edited: Aug 12, 2020
    patwhac, RondoBoi, Oldskewl59 and 5 others like this.
  16. 65Larkin

    65Larkin Well-Known Member

    Definitely following this one
     
  17. hugger

    hugger Well-Known Member

    This is my final attempt at a hot rod I feel like so I'm goin all out
     
    johnriv67 likes this.
  18. Mart

    Mart Gold level member

    There's where your CC $ went...
     
  19. Sebambam

    Sebambam Well-Known Member

    Fire!!!!
     
  20. offbrand Racing

    offbrand Racing Platinum Level Contributor

    Love the wheel choice!!
     

Share This Page