I have a nice set of 455 headers for sale. They were aluminized a couple of years ago and have a couple of indented areas that were needed for clearance. There is one area where it should have been clearanced a little more for the steering shaft and it rubbed a little. I could have moved the steering shaft holding plate a little and it would have taked care of that. I didn't think of it at the time. There are no scraped areas on the bottom of them. Anyway $150 + shipping
Just to let everyone know I checked the headers again and there is one area that is scraped on the bottom of one where the collector bottoms up to the exhaust pipe. The metal is worn away up to the bottom of the bolt hole - will not affect tightening it up. The bottom of the pipes are not scrapped.
Guys, I really could use the money selling the headers because money is tight but I could not even get be close to replacing them when i will need a set again for the same price. I think I am going to hold onto them for a while and see if my funds get better. Sorry for jumping the gun and listing them here and problems that may have caused!
Carl, Any luck on the cruise servo bracket? If you have one.. I Could help your fundsarelow problem Thanks:laugh:
Looking at the pic of your servo bracket, it was hard to determine whether mine is the same length as yours where it bolts on to the cable bracket. I need you to measure that length to try and match up to yours because there were 2 different ones used . The bracket and diaphram have been both gold cad plated ($40 to do) as per the originals were. They are very very nice and I would need to get at least $60 + shipping for this pair if the same.