I want to put a breather in my 430 valve cover. the hole is approx. .930" I figure I can fit a breather with a .750 neck in there with the right grommet. I need the grommet. Does anyone have a solution? Ive been spending a lot of time on summit and jegs to no avail. thanks for any help
I just found a Mr Gasket #6379 1"OD .750"ID grommet. Got a pair on jegs for $13 shipped. ouch. I will post how they work out. Anyone have other options? Post them here.
How about these? https://www.summitracing.com/parts/...MI3__DnqjZ3wIVkIqzCh0wBQ-cEAQYBCABEgK8EPD_BwE Ebay, free shipping, https://www.ebay.com/itm/Mr-Gasket-...h=item1a2707e40d:g:0BYAAOSw~AVYuyKT:rk:1:pf:0
Depending on what valve covers I was using, I would just make the hole bigger. Necessity is the mother of invention. Of course TA has the right grommets, but it will be expensive with shipping.
Larry, That one won't fit, the outside diameter is too big. I found this one, which is the same as the OP found; https://www.summitracing.com/parts/...MIk5PV4ZrZ3wIV0luGCh3i_gRDEAQYASABEgKgifD_BwE I am working on the same thing, and am looking forward to seeing how they work. Duane PS. Yeah I could make the hole in the valve cover bigger but I sure don't want to do it with a perfect set of re-plated original 69 valve covers.
Definitely not Ebay, free shipping, https://www.ebay.com/itm/Breather-6...h=item20eca02be6:g:AfkAAOSwGUpcBmOa:rk:3:pf:0
The mr gasket 6379 worked perfectly on my 430 valvecovers. Had to oil the breather to Insert it but everything is installed nice n tight Hope this helps someone!
Thanks, That's what I wanted to hear. I already have the parts coming but nice to know they will work. Duane