35th Anniversary Sale

Discussion in 'TA Performance' started by TABuickMike, Sep 20, 2018.

  1. sean Buick 76

    sean Buick 76 Buick Nut Staff Member

    This is very very good news! I have no doubt that the work experience you gained in your other jobs will help your success with TA. Keep up the great work and bring on the 350 heads!
     
    UPSTAGED1970 and sriley531 like this.
  2. racenu

    racenu Well-Known Member

    Congratulations Mike, 35 years is a huge milestone! Looking forward to another open house and bbq this winter, see you in the valley of the sun. Gord
     
  3. sriley531

    sriley531 Silver Level contributor

    These sale prices are giving me bad (good) ideas...
     
    mbusher83 likes this.
  4. Julian

    Julian Well-Known Member

    So any of those for $4500?
     
  5. TA Perf

    TA Perf Member

    Yes sir.
     
    Julian likes this.
  6. hwprouty

    hwprouty Gold Level Contributor

    Congrats to you guys and gals at TA!!
     
  7. Julian

    Julian Well-Known Member

    Great! Now you made this very difficult!

    What's the deposit amount?
     
  8. TA Perf

    TA Perf Member

    Mail in payment of $1875.00.
     
    Julian likes this.
  9. mbusher83

    mbusher83 Well-Known Member

    If we opted for the all ford block what is a realistic time table to receive it?
     
    Julian likes this.
  10. mltdwn12

    mltdwn12 Platinum Level Contributor

    Congrats Jr. VP :) 35 years and going strong. I remember buying my first set of KB headers from your Dad (still running them) when he was still working out of the garage on Greenway!
     
  11. mummy68

    mummy68 Silver Level contributor

    what's the timeline on the 455 heads? Also the total plus shipping to plano TX
     
  12. Dave Mongeon

    Dave Mongeon Well-Known Member

    This is a great opportunity to step up your Buick race program ! In both big power potential and reliability!
    If you've ever had the urge to go to the alum block don't miss this deal. back in 2012 when we started working on NBF again we were going to put an iron block in it but instead put the Tomahawk in and never looked back. We had the Ford main std cam version and took the rotating assembly out of the skyhawk turned the main down to 3 " and put that in the car with about 11;1 compression. Mitch learned to drive the car with that combo which was virtually trouble free. fast forward to 2015 after raising the compression and some additional port/intake work from Chris
    we had the car running regularly into the 8's at 151 mph problem free. in all the time i ran the hawk i never had a block girdled plated filled or whatever last more than 2 seasons and i don't have any urge to build another one like that. I've Known Mike for a long time and we've talked about this block for just about as long . In BG in 2015 I thanked Mike for making the block happen because i know it took a large personnel commitment to get it off the ground in the first place. I am also convinced that the block allowed Mitch and I to enjoy racing NBF over the last few years with confidence . As a matter of fact the same block/crank combo is getting updated again chasing that elusive N/A 4 digit power level and the block is not our concern.
    Dave
     
    Julian likes this.
  13. pphil

    pphil Well-Known Member

    so if i bought the standard block
    all other standard parts would work
    crank
    heads
    intake
    etc.....

    other than the aforementioned oil pan and pick up tube

    just how much power is capable to be made without going nuts of course

    scott
     
  14. Daves 71 GS

    Daves 71 GS Member

    Congratulation's and thank you for 35 years of Buick performance parts.Waiting for the ported Stage 1's for my wife's convertible now(In shipping).Will be placing order for block to accommodate my Stage 3's I already have in a week or 2.
     
    Julian and johnriv67 like this.
  15. hugger

    hugger Well-Known Member

    How's the race head project coming?? I'm sure you guys are concentrating on the 350 heads rite now but just curious?
     
    Julian likes this.
  16. Grandpas67

    Grandpas67 Well-Known Member

    Hey Michael, I don't suppose you're working on the website? I'd like the option of placing online orders. Just the other day I needed to order a oil pickup tube gasket...had to wait until the next day to make the phone call to have it sent to me. Tim does a great job on the phone and is always a pleasure to talk to...just saying it might be more convenient to your customers to have this option.


    Thanks
     
  17. TABuickMike

    TABuickMike Michael Tomaszewski Jr

    We will place an order at the end of the year and it would be at least 6-8 weeks until we would receive the blocks.

    Turn around time on a set of heads is a few days.

    Correct. Oil pan and pickup tube are different, everything else will bolt up.
     
    Julian likes this.
  18. gs66

    gs66 Well-Known Member

    Congratulations and best wishes for continued success! I second the single 4 dual plane nailhead aluminum intake request.
     

Share This Page