2x4 Performers and ST400?

Discussion in ''Da Nailhead' started by CTX-SLPR, May 12, 2003.

  1. CTX-SLPR

    CTX-SLPR Modern Technology User

    Anybody running a 2x4 with performers instead of the Carters? I'm having trouble hooking up the linkage for the ST400 to it. Also if anyone can take a good picture of the the linkage setup for either that or a stock 2x4 with the ST400 stuff connected I'd really appreciate it. I've got to fabricate a linkage because the one that was on there was fabricated and doesn't work with either of the tranny switches.

    Thanks,
     
  2. SpecialWagon65

    SpecialWagon65 Ted Nagel

    The one on the bottom is the factory 2X4 bracket-I had this photo handy. Check this board too-I think there are some pix already posted! If not, I can get some more. For a single edelbrock I had a Holly linkage peice that extended the carb link out to meet the trannie switch. I can get that part # tonight.
    See ya!
     
    Last edited: Apr 6, 2007
  3. CTX-SLPR

    CTX-SLPR Modern Technology User

    thanks, I've got the bracket, I need to see how the throttle rod is shaped and how is located in relation to the ST switch. Also I think, I'm missing part of the microswitch on the throttle arm, theres not way the fork contacts the button in its present configuration. I'm going to talk to the guy at Rancho Riv to see what he says. I'd love that partnumber though.

    Thanks agian,
     

Share This Page