Cage cert. to 8.50 through Aug of 2017 Stock Dash still intact Aluminum Kirkey seat with cover, 5 point harness 1 piece fiberglass front end 4 inch tall cowl fiberglass hood, fiberglass and deck lid Car weighs 2850 Ford 9 inch rear, 4.11 rear gears, Mark Williams axles 15x31.5x15 Weld Pro Stars on back, 15x4 on front 8 gallon fuel cell Car has 5800 original miles Wheelie bars $10,000 Turnkey running 9.7 with new motor &trans $20 k Call Rick 301-452-2207, NO TEXT
Bill I'm not sure what I'm doing. motor in the racecar is broke , so I'm just looking at my options . Wanna sell the motor from the SPORTWAGON FROM HELL?
The oil pressure wasn't right the last time out.so I tore it down and found a crack in one of the main webs . and to top it off the crank is cracked too.
Tony would kill me ! The motor is going in his White GSX , may not see action this year but soon ! That engine was in my GSX when I bought the car and raced it at the GS Nats in the early 90's ( 71 block ), then went in Tony White "X" for about 5 years and also raced at the GS nats, then he stroked it to 494 and spun a bearing after 2 years. I got it back in 07 and did the rebuild with the alum STAGE 2 Heads, lifter girdle, block fill and girdle and raced it till 2012 with the rear broke. Its tuff to see the engine sitting next to the wagon and the wagon on jack standsou: Oh well , I enjoy watching the races and saying " my wagon was faster then that Buick '!
I know Ricks car... seen it many times. VERY NICE car for that money!! Someone needs to buy it and make everyone happy!! Steve
Possibly , I'm currently looking at all my options .Check back in a couple days I should know what i'm gonna do by then.
Yes, does the car have a title? Anything else included with the roller like radiator drive shaft etc. and where is the car located. Thanks Mark
