1983 Regal T-Type - Parts

Discussion in 'V-8 Buick Powered Regals' started by RKHiPerformance, Mar 21, 2007.

  1. RKHiPerformance

    RKHiPerformance Turbocharged Sex Cylinder

    This post is from the Parts For Sale section:

    We have a 1983 Regal T-Type for parts. The car is rough inside & out.

    It came with a 350 Chevy of unknown history, but the block (casting 14016379) is a confirmed four bolt block. It has a double roller chain and idled with a slight lope. The heads are different castings but similar - one is a 487 casting ('71-72 LT1) and the other is a 493 ('71-72 400). Includes Moroso valve covers, balancer, water pump, stock fuel pump & pulleys. We know nothing else about the engine so we are offering it as a greasy rebuildable core for $200. Pick up only.

    Other parts include:

    Muncie M20 transmission May or may not need rebuild. Seemed okay when motoring around in 1st gear. Includes Hurst linkage but no stick $450
    Edelbrock 750 Carburetor with electric choke. May or may not need rebuild. Linkage has been modified - email for details. $75
    Four speed bellhousing #3899621 (Camaro/Chevelle/Corvette) Greasy $100
    G-body Z-bar $45
    Edelbrock Performer intake manifold #2104 ('87 & later SBC iron heads) Clean $75
    1983 T-Type Gauge Cluster Bezel is worn, gauges good $45
    Chevrolet V8 HEI Distributor Greasy but it works $25
    T-Type 3-Spoke Steering Wheel No horn button, good core $30
    OEM Flywheels SBC rough $25 each
    GN Rear Spoiler 5 pieces $160
    Prices do not include shipping.

    Pick up only:
    (4) 15x7 Z28 Wheels ('82-87 style) rough $50/set
    GN Hood with power bulge - pretty straight but paint must be stripped $150
    T-Tops Glass is good but trim & seals are shot $50/set
    Stock Driveshaft $25
    Stock TH350 Crossmember $50
    2.73 7.5" Posi Rear (informally confirmed with the car off the ground & the both-tires-spin-one-way test & counting driveshaft revolutions versus tire revolution) We'd prefer to sell this with the shell or sell last to keep the car rolling. $150


    The car is mostly complete...email us directly (RKHiPerformance@aol.com) for more details and pics and inquiries about other parts. No PM's, please.

    We are located in Lake Anna, VA 22553, about an hour south of Washington DC. We will be at Maryland International Raceway for the TNT and swap meet on the 31st of this month. We can bring some of these parts (not the engine or hood) if it helps.

    Thanks very much,
    Rick
    :beers2:
     

Share This Page