1972 Skylark 350 Sport Coupe - SOLD

Discussion in 'Cars for sale' started by stumper, Dec 2, 2017.

  1. stumper

    stumper Well-Known Member

    Here is my original thread started on this car:
    http://www.v8buick.com/index.php?threads/1972-skylark-350-sport-coupe.231639/#post-2744778

    I bought this car in 2011. I've done a lot of work to it. It runs, drives, stops. Needs completed. The car is from Arizona and very very solid. Most solid I've owned. Has 66,xxx miles on it, believed to be original based on the odometer, title and the shape of the engine bores. What's been done to it:

    Engine rebuilt to stock with new rings, bearings, seals, valve seals. Switched from a 2 barrel to a 4 barrel quadrajet. The Qjet was rebuilt by a reputable V8buick board member. New power steering hoses. A/C was pulled and converted to heater only firewall blower housing. I have all the A/C parts.

    Front end rebuilt - new upper & lower control arm bushings. New ball joints. New stabilizer bar bushings, new shocks.

    Brake system: New cylinders, shoes, rubber hoses, master cylinder. Has power brakes

    Wheels- Crager SS style. with good tires, plenty of tread on them..

    Gas tank has been dropped, cleaned out, new rubber vent hoses, new sending unit, tank was painted.

    Body is solid. I have pulled out passenger side rocker panel dent and added filler. Front clip was dustless blasted (water + media = no warping) Battery tray area was patched. rear and front window channels were repaired and glass re-installed (new windshield). Still a spot on the driver's inner door that needs patched (it's unnoticeable from the outside, you have to get down underneath to see it). The whole car was sanded and sealed with primer sealer. Still some bodywork and blocking needs done before painting, but it's not a lot. Trunk floor and interior floor is original and solid. Frame is original and solid.

    Interior - Black seats in great shape - no tears or rips. Newer black carpet. have door panels, but they are a bit rough. I have the side window glass, but needs installed. I have a set of brand new window fuzzies. The whole floor, roof and behind back seat were sealed with FatMat sound deadening insulation. (it's like the more expensive foil backed insulation) Brand new seat belts front and rear. Upgraded to modern front seat retractable shoulder/lap belts. Dash pad is cracked. Speedometer stopped working this summer. Gas gauge works. blinkers work. headlights work.

    This car is in very good shape and needs to be finished. It's super solid and would not be a huge project.

    I am looking to sell it outright for $4,500 obo. or I may trade it for another car + cash depending on the condition & model etc. I am located in Cleveland Ohio.
     
    Last edited: Dec 4, 2017
  2. stumper

    stumper Well-Known Member

    38D442EC-5BE9-487F-BAA8-543F330D6780.jpeg D1DBD5CE-D672-49BA-B26D-6E84B607C427.jpeg 38D442EC-5BE9-487F-BAA8-543F330D6780.jpeg D1DBD5CE-D672-49BA-B26D-6E84B607C427.jpeg F6FC6D1E-D8CF-4E2E-A799-6903EE8ED48C.jpeg A9868DE6-D6CB-4834-8AEB-FB32D01AA275.jpeg F51AB38E-6FF4-47AD-98C1-1773447EB90C.jpeg 90D0F8B9-F0C2-4158-A39A-3EAA7A4BE391.jpeg Here are some photos. More in the build thread.
     
  3. stumper

    stumper Well-Known Member

  4. stumper

    stumper Well-Known Member

    DA6B8DA8-935B-45A3-AD8A-1923240109AC.jpeg 586D05E5-B2B9-45CA-BC23-39436FC05B71.jpeg 4F429298-3118-42BC-BBF3-C0E73580A861.jpeg More pictures
     
  5. Stan1971

    Stan1971 Well-Known Member

    In line pm sent
     
  6. stumper

    stumper Well-Known Member

  7. messerman

    messerman Member

    Inline and pm sent
     
  8. Speedfreak

    Speedfreak Member

    Still available?
     
  9. stumper

    stumper Well-Known Member

    - Pending pickup
     
  10. stumper

    stumper Well-Known Member

    SOLD - Nice to meet you guys - STAN71
     

Share This Page