1971 buick riviera parting out (chicago ridge, il)

Discussion in 'Car Part-Outs' started by dedsleds, May 16, 2012.

  1. dedsleds

    dedsleds KEEP ON TRUCKIN'

    Sold my last set of windshield trim
    sold rocker moldings
     
  2. dedsleds

    dedsleds KEEP ON TRUCKIN'

    Sold:

    Oil filter housing
    thermostat housing
    distributor
    starter
    alternator w/bracket
    power steering pump w/brackets
    upper/lower pullies
    fuel pump w/line


    lower a/c compressor bracket 25.00
    heads w/manifolds 250.00
    heads 150.00/pr
    manifolds 125.00
    intake 40.00
    probably keeping carb and air cleaner.....
    Block w/rotating assembly, pan 300.00
    working t-400 longtail trans 150.00
    valve covers 15.00/pr
    timing chain cover 75.00
     
  3. dedsleds

    dedsleds KEEP ON TRUCKIN'

    Sold:

    A/c condeser brackets
    riviera emblems
    trunk release setup
    rear defoggfer setup
    crappy visors that stayed up
    cowl screen
     
  4. dedsleds

    dedsleds KEEP ON TRUCKIN'

    scrapped the hood and fenders

    saved driver's side fender end pc, pot metal pc, 1 broken nub 5.00
     
  5. dedsleds

    dedsleds KEEP ON TRUCKIN'

    scrapped the front seat frame and threw out the rear seat

    saved:


    working but needs some work bench seat power seat setup 50.00
    upper seat parts...complete upper pass, driver's frame, headrests, seat backs, misc 35.00/all
    bunch of seat buttons 10.00/pile
     

    Attached Files:

    • 037.jpg
      037.jpg
      File size:
      58 KB
      Views:
      4
    • 038.jpg
      038.jpg
      File size:
      60.5 KB
      Views:
      5
    • 039.jpg
      039.jpg
      File size:
      58.7 KB
      Views:
      4
    • 040.jpg
      040.jpg
      File size:
      57.4 KB
      Views:
      8
    • 041.jpg
      041.jpg
      File size:
      86.8 KB
      Views:
      7
  6. SportWagonGS

    SportWagonGS Moderator

    before scrapping the doors I need the area for the door handles cut out, I want to graft a set of boat tail handles onto my 73 Electra and that would make my life easier
     
  7. dedsleds

    dedsleds KEEP ON TRUCKIN'

    well i sold the driver's door and i didn't scrap the other door yet, still together w/glass, pwr window setup.......what are you offering for that pc? i sold all the handles i had also

    eric 7082209204
     
  8. SportWagonGS

    SportWagonGS Moderator

    Handles are not an issue, I have a pitted set to use for mock up, will get nice ones after I'm done. if you can sell the doors by all means do so, but if they were rusty I'd be wanting these parts, I do not want a good set of doors cut up as I can make the parts I need and might have to since the contour of the Electra door is a bit different than the Riv I think. I would need both sides as well. as for offer I have no real idea, $45 shipped??
     
  9. dedsleds

    dedsleds KEEP ON TRUCKIN'

    all i have is the passenger side....let me give this door a few more weeks and i'd be glad to cut that out after that. maybe sooner. i'd do 30.00 shipped for the one, if i had both 45 shipped is fair....paypal accepted...eric 7082209204
     
  10. SportWagonGS

    SportWagonGS Moderator

    sounds fair, if I fab mine up before that I'll let you know
     
  11. dedsleds

    dedsleds KEEP ON TRUCKIN'

    Sold the steering column w/wheel
    scrapped: Wiper arm transmissions, taillight harness, headlight harness

    71-73 a/c dash vents, switch, vent tubes, outer evap box 1/2, vacuum lines, cable, htr core.....all for 25.00

    found 1 good interior dome light.....not broken 35.00....
     
  12. dedsleds

    dedsleds KEEP ON TRUCKIN'

    Open to offers, leaning toward scrapping/recycling most of this stuff before the fall hits to make room in my shed....eric 7082209204
     
  13. dedsleds

    dedsleds KEEP ON TRUCKIN'

    sold the clock
     
  14. testtones1

    testtones1 Well-Known Member

    do you still have the LH upper control arm?
     
  15. dedsleds

    dedsleds KEEP ON TRUCKIN'

    Yes 7082209204 eric
     
  16. testtones1

    testtones1 Well-Known Member

    ok. sending a PM
     
  17. dedsleds

    dedsleds KEEP ON TRUCKIN'

    sold radio and rear speaker loom
    SOLD HEADLIGHT BEZELS, TURN SIG BEZELS, HEADER PANEL TRIM, POWER WINDOW SWITCHES AND PLATES
     
  18. SportWagonGS

    SportWagonGS Moderator

    we were talking about the door handle part of the door, don't worry about that now as I fabricated up a set...I hope you are able to sell the whole door!
     
  19. dedsleds

    dedsleds KEEP ON TRUCKIN'

    sold

    all a/c related parts
    dome light
    wiper motors and related cowl parts
    cruise control parts
    sun visors
     
  20. dedsleds

    dedsleds KEEP ON TRUCKIN'

    WHAT'S LEFT

    complete power passenger door 100.00 (no handle)
    hood release setup, w/pass kick panel 20.00
    softray rear glass w/trim 80.00
    softray 1/4 glass w/track 60.00/pr
    tilt column col shift 100.00 (71-76)
    t400 kickdown switch/bracket 20.00
     

Share This Page